2, laboratory personnel in chemical experiments, must strictly abide by the operating rules, to avoid all kinds of accidents.
3, carefully record the chemical experiment, correctly handle and sort out the test data.
4. Fill in the test report correctly, so that the project is complete, the handwriting is clear and correct, and there are signatures of experimenters and testers. Important chemical inspection items and inspection reports sent to units outside the group company must be signed by the section chief or competent leader.
5, laboratory personnel should take good care of the instrument, and do a good job of maintenance.
6. Provide accurate and reliable analysis reports for the experimental research of new technologies, new materials and new products of the company and the group company.
7. In accordance with the relevant regulations, do a good job in the collection, storage and safe use of chemicals, especially the storage of highly toxic, explosive, concentrated acid, alkali and other items, to prevent the loss and damage of chemicals, so as not to endanger personal safety.
8. Professional technicians are responsible for the technical guidance of other personnel in this room and the verification of important test results. The verification of phosphating solution can be carried out by the operator himself.
9. Be responsible for the inspection results.
10, complete other work assigned by the leaders.
Job responsibilities of laboratory technicians. Carry out inspection and analysis according to the inspection methods and standards of each inspection item, be familiar with the operating procedures of the instruments and equipment used, and fill in the working conditions of the instruments and equipment carefully and record them.
Second, fill in the sample handover form carefully.
Three, abide by the analysis and measurement control procedures, fill in the original inspection records, ensure the accuracy and reliability of the analysis data, and be responsible for the inspection quality.
Four, found abnormal test results, to find the reason, to determine the sample, and promptly report to the person in charge.
Five, do a good job of cleaning laboratory equipment, classified storage, keep the room clean and tidy.
Six, study hard business knowledge, study hard detection technology, explore the analytical methods mastered, and constantly improve the detection level.
Seven, consciously abide by the rules and regulations of the factory, stick to their posts, pay attention to safe operation, and check whether the water, electricity, doors and windows are closed before coming off work.
Eight, familiar with the relevant laws, regulations, standards and rules and regulations of sewage treatment, testing and discharge, strictly abide by professional ethics, and do a good job of testing in a realistic way.
Job responsibilities of laboratory technicians 3 1. Every day, the water quality in the boiler should be sampled and tested to ensure that the water quality is qualified.
2. Use a burette to extract boiler water to determine the alkalinity of boiler water, with no more than 20 drops per day.
3. Test the hardness index of soft water with test paper. The standard is PH value, which can't exceed 7, and can't exceed 0.3 when measured by hydrometer.
4. If the measured water quality exceeds the standard, replace the salt and backwash the ion exchanger with salt. It can only be used normally after it is washed qualified.
5, after the test to clean up all kinds of instruments, reserve samples, salt, etc. , reasonable collection.
6. Determine the PH value of the water in the desulfurization pool and report the measurement results to the superior monitor on duty in time.
7, do a good job of inspection and maintenance of water quality treatment equipment.
8, completes the temporary tasks arranged by the superior leadership.
9, make records every day after the test, succession seriously.
Chemist 4 job responsibilities 1, responsible for the inspection of raw and auxiliary materials, packaging materials, semi-finished products and finished products;
2. Make inspection records carefully and correctly handle and sort out inspection data;
3, strictly implement the registration procedures of measuring instruments and inspection equipment, establish ledger files, so that the accounts are consistent;
4. Supervise the production work. Strictly follow the process documents and quality control procedures to help production workers analyze the causes of quality problems;
5. Non-conforming products shall be identified, recorded, evaluated, isolated and disposed of according to regulations;
6. Issue inspection report and be responsible for the correctness of the report.
Chemist's responsibilities 5. Chemist's responsibilities of water quality testing center:
1. Seriously implement the water quality standards and be responsible for the correctness of the test results; Complete the inspection task on time to ensure the smooth progress of the production task.
1. Actively participate in various assessments to ensure the accuracy, scientificity and fairness of data; Fill in the original inspection records carefully to ensure that the figures are accurate and the handwriting is clear.
3. Operate the instrument in strict accordance with the operating rules of the instrument, keep the use records and daily maintenance of the instrument, and keep the testing room and surrounding environment clean and tidy.
4. Major quality problems should be reported to the competent leader immediately, so as to take timely measures to reduce losses; In case of emergency and customer service hotline, accept instructions and show up at the scene for testing in time.
5. Cooperate with the internal audit work of the internal audit team and implement the rectification of the corrective measures proposed by the internal audit team.
6. Keep all kinds of records, that is, technical conditions, confidential during the test of this site.
7. The director of the collaboration room provides the purchasing plan of instruments, equipment and consumables.
8. Waste residue, waste liquid, waste culture medium and toxic and harmful substances produced during the experiment shall be treated according to relevant regulations.
9. Seriously participate in training and study, and strive to improve their overall quality.
10. Complete other tasks assigned by the leaders.
Workflow of Chemists in Water Quality Testing Center
1. Sample detection and analysis process:
After receiving the water sample, the relevant testing room shall analyze the sample according to the items in the testing task list, the detailed rules for the implementation of water quality testing in 20xx and the standard methods issued by the state, industry and Ministry. When testing, the original records and inspection reports of the tested items should be filled in according to the requirements of Record and Data Control Procedure, and submitted to the director of the room after signing, and then submitted to the quality director after being audited by the director of the room.
2. On-site detection and analysis process
First, prepare drugs, standard samples and instruments for field use; Secondly, according to the water quality detection method of this station, the water quality of the roof is detected to ensure the accuracy of the detection results. Finally, review the test results, issue a report and fill in the field records.
Chemist 6 1 job responsibilities, product inspection, inspection record management, submitted to the superior leadership;
2, found that the product is abnormal or does not meet the requirements, issue a nonconformity report;
3, master the product acceptance criteria, and identify the product status and product traceability;
4. Management and maintenance of laboratory instruments and equipment
Responsible for the ordering and follow-up of packaging bags, and make inspection reports.
6. Complete other tasks assigned by the leaders on time, and be responsible for tracking.
Responsibilities of laboratory technicians 7 1. Working principles of laboratory technicians: objective and fair, seeking truth from facts, rigorous and honest, and effectively controlling the quality of raw materials and products.
2. All quality inspectors should follow the sampling rules.
3. Responsible for sampling and sensory inspection of incoming raw materials.
4. Responsible for the inspection and testing of finished products and raw materials.
5. The routine inspection items of each batch of raw materials shall be carried out according to the relevant provisions of raw material acceptance standards.
6. The original records of each batch of raw material test and finished product test are loaded into the file and clearly available.
7. Timely summarize the test results every day and record them in the designated files. In principle, the finished products and raw materials produced every day must be tested on the same day and reported to the section chief.
8. All laboratory records shall not be changed at will. If a small amount of data needs to be corrected, you should cross the original data and write the correct number next to it, so that you can clearly identify the original data.
9. The original records of all standard liquid preparations are clearly identifiable.
10. Chemists should be responsible for their own test results. Therefore, the test name must be marked after the test record.
1 1. Chemists should have a correct understanding of their test results. If they doubt their own testing for special reasons, they should report to the department head in advance to prevent quality accidents.
12. Do a good job of keeping the samples of raw materials and finished products on that day and stack them neatly in the sample cabinet.
13. Observe and record the observation records of finished products.
14. Make monthly quality reports of raw materials and products on a regular basis.
15. Keep the laboratory clean and tidy. At the end of the test, ensure that all instruments are cleaned according to the specified requirements. The laboratory work platform must be cleaned once a day. All laboratory instruments shall be placed in an orderly manner and shall not be piled up at will.
16. Complete other tasks assigned by company leaders.
Responsibilities of laboratory technicians. Seriously study the national grain and oil inspection standards and related laws, regulations and operating procedures.
Two, responsible for sampling, inspection and testing of grain and oil in and out of the warehouse, and issue a quality inspection report according to the inspection results.
Three, the chemist according to the national grain and oil quality standards, in accordance with the warehouse for each batch of grain and oil purchase, delivery quality regulations, do not meet the quality standards of grain and oil to refuse to accept, and promptly report to the leadership.
Four, the use of inspection and testing equipment, to do a good job of maintenance, to ensure the accuracy of inspection and testing data.
Five, the use of dangerous drugs and toxic reagents, should be used in accordance with the operating procedures and precautions, to do a good job of keeping all kinds of drugs and reagents, to ensure safety.
Six, do a good job of quality appraisal twice a year, and submit the inspection results to the library leaders in time to provide a scientific basis for the rotation of grain and oil reserves, and ensure that the grain and oil reserves are always new.
Seven, complete other tasks assigned by the superior.
Responsibilities of laboratory technicians. Chemists should consciously abide by the company's rules and regulations, stick to their posts, check their daily work on time and accurately, and ensure the fairness and seriousness of the inspection work.
2, laboratory personnel must be in strict accordance with the current quality standards for sampling, inspection, calculation or judgment, etc. Pay attention to observe various phenomena in the experiment, make original records in time, and strictly prohibit scripted or rote learning, change inspection standards and make subjective conclusions without authorization, and strictly control the quality.
3. Complete the inspection work on time, and achieve "three in time" (timely sampling, timely inspection and timely report) and "five in accuracy" (accurate sampling, accurate instrument, accurate analysis, accurate record calculation and accurate report).
4. The inspection of the original records should adhere to the principle of seeking truth from facts. The original records are true and complete, and they are responsible for the inspection results and conclusions, and the confirmer shall sign them.
5, laboratory personnel should be familiar with the test methods of the tested samples, skilled use of relevant pharmaceutical reagents, should be carried out in the designated area, and pay attention to the safety of operation, to prevent errors and accidents. Skillfully use all kinds of testing instruments and equipment, take good care of them, check them regularly, and do a good job in cleaning and maintenance.
6, at any time to the relevant departments to reflect the quality problems, and put forward suggestions.
7, strengthen learning, and constantly improve the technical level, do a good job of technical data collection, storage and archiving.
8. Laboratory personnel should take turns to clean the laboratory. Daily cleaning contents include: desktop (chemical composition, instrument composition), dust on instrument surface, floor cleaning and mopping. Pay attention to safety, fire and theft prevention. Dress according to the regulations at work and do a good job of personal hygiene.
9, laboratory personnel have the responsibility to buy reagents, instruments and appliances used in the analysis, and sign when buying.
10. The standard reagents commonly used for analysis are prepared by analysts in turn. If it is impossible to prepare for leave or business trip, the personnel on duty will prepare it, which is not included in the rotation. In the process of preparation, it is the Lord's turn to prepare, and others assist in preparation. Division of responsibilities: the main distributor is responsible for 80% and the auxiliary distributor is responsible for 20%. Assist the main distributor, check the results and sign them. The prepared standard solution should be labeled, indicating the name, concentration, preparation date, expiration date, main dispenser, auxiliary dispenser and other information.
1 1. Laboratory personnel take turns to add liquid, calibrate, record and sign Karl Fischer for moisture analysis in the production workshop every week. Confirm the error range of gas chromatography. If the error range of gas chromatography exceeds 0.2% for no other reason, you must debug the machine, be responsible for the debugging results yourself, make records, and confirm and sign with the staff on duty in the distillation column.
12. Before leaving the analysis room after work every day, pay attention to water, electricity, gas, doors and windows, and take all safety precautions (except in special circumstances).
Chemist's job responsibilities 10 Chemist's job responsibilities In order to standardize the laboratory technician's job procedures, clarify the laboratory technician's job responsibilities and improve the laboratory technician's job responsibility consciousness, the following provisions are made.
1. Chemists should be familiar with the relevant laws and regulations, industry policies, national and industry standards of the industry, and carry out testing work in strict accordance with the existing effective technical standards at all levels.
2. Chemists should receive relevant job training, hold relevant certificates after passing the examination, and be familiar with the testing items carried out in our laboratory. Continuously improve business level and operational skills.
3. Chemists should consciously accept the assigned detection tasks and carry out detection work in time according to appropriate standards and analytical methods.
4. The laboratory technician shall be responsible for the reported inspection results, ensure the authenticity, accuracy and reliability of the inspection results, and fill in the use records and original records of instruments and equipment carefully, so as to ensure the accuracy, completeness and clarity of the records and ensure the reproducibility of the inspection process.
5. Chemists should be familiar with the operation methods and maintenance knowledge of various instruments and equipment used in the detection process, and operate according to the specifications.
6. Laboratory technicians are responsible for receiving, storing and circulating the designated samples during the testing process, and are responsible for the validity, integrity and representativeness of the samples.
7. Chemists are responsible for preparing all kinds of reagents and standard solutions used in testing items, ensuring the effectiveness of reagents and standard solutions, calibrating standard solutions regularly to ensure the accuracy of their concentrations, verifying them with standard samples, and making relevant records.
8. Chemists should monitor the laboratory environment at any time to eliminate the harmful effects of environmental factors on the test results, and make relevant records.
9. All kinds of drugs, reagents, consumables and labor protection articles used in the inspection process should be used correctly and reasonably to prevent waste, and must be registered when receiving.
10, the laboratory technician should do a good job of housekeeping in the laboratory to ensure that the table and floor of the laboratory are clean and tidy, and the experimental instruments are placed in an orderly manner. Waste gas, waste liquid and solid waste generated by the experiment should be discharged or discarded after proper treatment.
Job responsibilities of laboratory technician 1 1 First of all, do a good job in water quality testing carefully, effectively control the quality, and ensure that the water quality of ex-factory products is 100% qualified.
Two, every day in the finished product packaging workshop or barrel workshop sampling inspection. During operation, the straw is cleaned with sterile water first, and then put into the pressure cooker for disinfection to ensure that the whole test process is completed in a sterile state.
Three, found that the test results exceed the standard or there are signs of exceeding the standard (less than three Escherichia coli per 100 ml, and the number of bacteria per ml is less than 100), to directly sample the water treatment for further testing, and analyze the reasons.
Four, after the test results come out, we should carefully fill in the test sheet, so that the figures are accurate and the information is complete, and send it to the leader in charge of production for signature.
Five, the laboratory instruments should be cleaned in time after use, and the laboratory room should always be kept in a good sanitary condition, so that the windows are clean and spotless.
Six, in addition to the water quality test work, according to the needs and leadership arrangements, complete the finished product packaging and other tasks.
Basic knowledge of laboratory technicians
1, what is the method of oiling the acid burette?
Answer: Take off the piston, dry the inner wall of the piston and plug sleeve with clean paper or cloth, dip a small amount of vaseline with your fingers and apply a thin circle on both ends of the piston. Do not apply vaseline on both sides near the piston hole to avoid blocking the piston hole. After coating, put the piston back into the sleeve, rotate the piston several times in the same direction to make the vaseline evenly distributed and transparent, and then clamp it with a rubber ring to fix the piston in the plug sleeve.
2. How to test the leakage of acid burette?
Answer: Close the piston, add distilled water to a certain dividing line, and the burette will stand upright for about 2min. Carefully observe whether the liquid level on the scribing line drops, whether there is water drop at the lower end of burette, and whether there is water seepage in the piston gap. Then rotate the piston 180 and wait for 2 minutes before observing. If there is water leakage, dry it again.
2. How to test the leakage of alkaline burette?
Answer: Add distilled water to a certain fractional line and stand the burette upright for about 2min. Carefully observe whether the liquid level on the scribing line drops, or whether there is water dripping at the tip of the lower end of the burette. If there is water leakage, replace the glass beads in the rubber hose and choose a smooth one with the right size and try again. If the glass beads are too small or not smooth, water may leak and the operation is inconvenient.
3. How to test the leakage of acid burette?
Answer: Close the piston, add distilled water to a certain dividing line, and the burette will stand upright for about 2min. Carefully observe whether the liquid level on the scribing line drops, whether there is water drop at the lower end of burette, and whether there is water seepage in the piston gap. Then rotate the piston 180 and wait for 2 minutes before observing. If there is water leakage, dry it again.
4, burette use precautions?
Answer: (1) After the burette is used up, pour out the residual solution in the burette, rinse it with water, fill it with distilled water to above the scale, and put a large test tube on the nozzle, so that it is not necessary to rinse it with lotion before the next use; (2) When the acid burette is not used for a long time, the piston part should be padded with paper, otherwise the plug is not easy to open for a long time, and alkaline titration should be carried out.
5. How does the basic burette catch bubbles?
Answer: The rubber hose of the basic burette should be bent upwards, and the glass beads should be squeezed hard to make the solution spray out from the tip to eliminate bubbles. Bubbles in alkaline burette are usually hidden near glass beads. You must check whether the bubbles in the rubber hose are completely driven out, then adjust the liquid level to 0 and 00mL, or write down the initial reading.
6, the correct method of titration?
Answer: When titrating, the tip of burette should be inserted into the lower part of conical bottle mouth (or beaker mouth) at 1-50px. The titration speed should not be too fast, and 3-4 drops per second is appropriate. It can't flow downward like a liquid column. When dripping, you should shake and rotate in the same direction, not shake back and forth, because then the solution will splash out.
Responsibilities of laboratory technicians 12 Responsibilities:
1, carry out daily inspection work under the leadership and guidance of the director;
2. Analyze the collected project specimens, and get effective data according to the test results, so as to provide effective basis for clinic;
3, undertake specimen processing, registration, technical operation, inspection results and other inspection work; Manual preparation of special reagents; Responsible for the daily maintenance and regular inspection and calibration of instruments to prevent all kinds of errors and accidents;
4, responsible for the professional quality control work, strictly implement the inspection rules and regulations and technical operation procedures.
Requirements:
1, graduated from medical laboratory, with the qualification certificate of medical laboratory technician (division);
2, skilled operation of inspection instruments, and understand the basic situation of inspection;
3. Have a good learning attitude, be serious and responsible, and have a team spirit.
Extended reading:
Responsibilities of laboratory technicians (1)
1. Chemists must strictly abide by the company's rules and regulations and employee code. Adhere to the policy of "safety first, prevention first".
2, laboratory technicians must love their jobs, adhere to the objective, fair and just.
3. Laboratory technicians should treat their work with an attitude of Excellence and improve their personal quality through continuous learning.
4. Chemists should be familiar with the equipment, drug performance, technical operation procedures and analysis errors of this position in order to complete the laboratory tasks in time.
5, laboratory technicians should work in advance, wear labor protection articles, and make preparations. Offenders will be fined 10 yuan.
6, abide by the commuting time, it is forbidden to leave, string hillock, laboratory clean and quiet, it is forbidden to play. Offenders will be fined 10 yuan.
7. Except in special circumstances, non-laboratory personnel are strictly prohibited from entering the laboratory.
8, laboratory technicians should attend a study summary once a month.
9. The laboratory technician should keep the laboratory data confidential so that the company leaders and relevant departments can grasp it in time. Offenders will be dealt with severely.
Responsibilities of Laboratory Technicians (2)
1, responsible for the laboratory work of the group company and the company.
2, laboratory personnel in chemical experiments, must strictly abide by the operating rules, to avoid all kinds of accidents.
3, carefully record the chemical experiment, correctly handle and sort out the test data.
4. Fill in the test report correctly to make the project complete. (1) The handwriting is clear and correct, and it is signed by experimenters and inspectors. Major chemical test projects and test reports sent to units outside the group company must be signed by the section chief or competent leader.
5, laboratory personnel should take good care of the instrument, and do a good job of maintenance.
6. Provide accurate and reliable analysis reports for the experimental research of new technologies, new materials and new products of the company and the group company.
7. In accordance with the relevant regulations, do a good job in the collection, storage and safe use of chemicals, especially the storage of highly toxic, explosive, concentrated acid, alkali and other items, to prevent the loss and damage of chemicals, so as not to endanger personal safety.
8. Professional technicians are responsible for the technical guidance of other personnel in this room and the verification of important test results. The verification of phosphating solution can be carried out by the operator himself.
9. Be responsible for the inspection results.
10, complete other work assigned by the leaders.
Responsibilities of Laboratory Technicians (3)
1. Carry out testing in strict accordance with product standards and experimental methods, and achieve "five precisions and three timeliness" (five precisions: sampling, benchmarking, analysis, measurement and accurate reporting of results; Timely: sampling, analyzing and reporting the results in time), and actively serving the business.
2. Strictly carry out the laboratory test plan, sample and analyze at the specified time, project and place, and it is strictly forbidden to miss the inspection by mistake, so as to prevent the occurrence of analysis accidents.
3. Strictly fill in the analysis records and analysis reports, adhere to the principle of seeking truth from facts, write clearly, do not tear, daub or write down the contents unrelated to the products, and be responsible for the data issued.
4. Strictly keep samples and duplicates, be the "eyes" of the business, and properly keep records and files of all kinds of data.
5. Seriously implement the regulations on the management of equipment and instruments, and be responsible for the maintenance of equipment and instruments, so that there is no oil pollution, dust and trouble-free.
6, strict post succession system, so that the responsibility is clear, the situation is clear, leaving no secrets.
7. Strictly implement the operating rules of safe and civilized production in the laboratory, consciously abide by labor discipline, implement post management rules, develop a good work style, and ensure safe and civilized operation.
8, keep the laboratory hygiene and equipment clean every day.
9. Seriously complete other tasks assigned by the company leaders and the director of the oil depot.
Duties of a chemist 13 1, Duties of a chemist
1. Chemists must strictly abide by the company's rules and regulations and employee code. Adhere to the policy of "safety first, prevention first".
2. Laboratory technicians must be professional, objective, fair and just.
3. Chemists should treat their work with an attitude of Excellence and improve their personal quality through continuous learning.
4. Chemists should be familiar with the post equipment, drug performance, technical operation procedures and analysis errors in order to complete the test task in time.
5. Chemists should work ahead of time, wear labor protection articles and make preparations. Offenders will be fined 10 yuan.
6. Observe the commuting time, and it is forbidden to leave the post or visit the post. Keep the laboratory clean and quiet, and no playing is allowed. Offenders will be fined 10 yuan.
7. Except in special circumstances, non-laboratory personnel are strictly prohibited from entering the laboratory.
8. Chemists should participate in research and summary once a month.
9. The test data is confidential and only available to the company leaders and relevant departments in time. Offenders will be dealt with severely.
2, pharmaceutical laboratory technician job responsibilities
1. Sample the inner packaging materials and purified water, ensure that the samples are representative at the required accurate sampling locations, and provide routine laboratory test data timely and accurately.
Second, the inspection of inner packaging materials and purified water, fill in all kinds of original records and laboratory data in time, seek truth from facts, do not tamper with the data, and collect and sort out all kinds of reports.
Three, the stability of raw materials and finished products included in the relevant material items and records to fill in and test data.
Four, the determination of dust particles and record and summary
Five, cooperate with the winery test and review.
Five, the management of laboratory reagents and recipients ledger
Cleaning and maintenance of muffle furnace instruments, high performance liquid chromatograph and electric blower drying oven. Strengthen the maintenance of laboratory instruments, regularly check the self-inspection items, and be responsible for contacting the measurement department in time, and regularly inspect the measuring equipment used to ensure the accuracy of laboratory tests and analysis.
Seven, temporary sampling projects and temporary laboratory projects should obey the arrangement of the leadership, cooperate with the analysis of laboratory results, and make laboratory records.
Eight, do a good job in laboratory hygiene and cleaning, to ensure that laboratory utensils and items are neatly placed. Hygiene of cold storage room and reagent room and fill in temperature and humidity records.
3, laboratory technician job responsibilities
1. working principle of laboratory technician: objective and fair, seeking truth from facts, rigorous and honest, and ensuring the quality of raw materials and products.
2, responsible for the arrival of raw materials sampling, sensory inspection.
3, responsible for the inspection and test of finished products and raw materials.
4. Routine test items for each batch of products.
5. The routine inspection items of each batch of raw materials shall be carried out according to the relevant provisions of raw material acceptance standards.
6. Testing times: In principle, finished products are tested at least once per shift (batch) and raw materials are tested at least twice per batch.
7. The original records of each batch of raw material test and finished product test are loaded into the file and clearly identifiable.
8, daily test results are summarized and recorded in the specified files in time, in principle, the finished products produced every day and into.
Raw materials in the warehouse must be tested on the same day and reported to the department manager;
9. All laboratory records shall not be changed at will. If there is a small amount of data to be corrected, you should cross the original data and write the correct number next to it. Make sure the original data is clear and easy to read.
10, in order to ensure the accuracy of the test, all common straws should be used for special purposes according to actual needs, and they should not be used in series at will, and all straws in use should be marked with the users;
1 1. The original records of preparation of all standard solutions are clearly identifiable, and the standard solutions are clearly marked;
12, the chemist is responsible for his own test results, so the test name must be marked after the test record;
13. Chemists should have a correct understanding of their test results. If they doubt their own testing for special reasons, they should report to the department head in advance to prevent quality accidents.
14, do a good job of keeping the samples of raw materials and finished products on that day and pile them neatly in the sample cabinet;
15. Observe and record the observation records of finished products.
16. Make monthly reports on raw materials and product quality on a regular basis.
17. Keep the laboratory clean and tidy. At the end of the test, ensure that all instruments are cleaned according to the specified requirements. The laboratory work platform must be cleaned once a day. All laboratory instruments shall be placed in an orderly manner and shall not be piled up at will.
18. Complete other tasks assigned by company leaders.
Responsibilities of Laboratory Technicians 14 Responsibilities of Laboratory Technicians
1. Responsible for the sensory inspection of all incoming raw materials, small materials, packaging bags and labels; Sensory inspection qualified, timely sampling to the laboratory, and notify the keeper to weigh; If the sensory test is unqualified, notify the return and fill in the disposal report of unqualified products.
2. Be responsible for the registration of the test sheet and hand it over to the keeper in time, and make handover records.
3. Supervise the storekeeper to hang up the identification card within half an hour after receiving the test sheet.
Responsibilities of technicians in metal and mineral laboratories
1. Test and analyze according to the time requirement of sample analysis.
2. Timely release accurate test results and detailed analysis reports.
3. Timely, accurate and standardized original records of sample detection and analysis.
Responsibilities of inspection and laboratory technicians
1. Responsible for the management of the animal experimental field of R&D department.
2. Improve the workflow of the proving ground, improve the department management system and the post responsibilities of employees.
3. Assist the marketing department to conduct market research, and correctly grasp the market dynamics for the company.
4. Responsible for the inspection and testing of raw materials, semi-finished products and finished products in material production.
Responsibilities of technicians in raw milk laboratory
1. Responsible for the inspection of third-party raw milk.
2. Responsible for the maintenance and use of laboratory instruments and equipment.
3. Responsible for the preparation and preservation of various drugs in the laboratory.
4. Responsible for the cleaning of experimental supplies and the sanitation of the health areas under its jurisdiction.
5. Responsible for other work assigned by the leadership.
Responsibilities of chemists: 15 1. Test the physical and chemical indexes of finished products, raw materials and samples to ensure that the quality of products and raw materials meets the standards.
2, according to the requirements of the relevant system for inspection samples and observation, to ensure the timely discovery and disposal of abnormal situation.
3, the implementation of laboratory test results records and archives, data management, to ensure the safety and traceability of all data.
4, the implementation of laboratory drug management, to ensure that the drug recipients meet the specifications, as well as the use and storage of drugs.
5. Change the samples of the company's booth regularly to ensure that the displayed samples are consistent with the actual situation.
6, laboratory 7S management and instrument maintenance.
7, other work assigned by the superior;