Go to Tools-Accounts-Mail, select the email account to use when the error message appears, and then press Content. Go to the "server" page and check whether your POP3 and SMTP settings are correct, and whether your account name and password are wrong. Some free emails only support POP3, not SMTP. If you use this kind of mail, you still need to set it as the SMTP server of your ISP in the SMTP part of Outlook Express (setting of outgoing mail) in order to send the mail smoothly.
If your free mailbox supports both POP3 and SMTP, set it according to its regulations. Don't be smart enough to change SMTP to SMTP of your ISP.
Second, you can't send mail by relying on denial.
Wrong SMTP settings. The SMTP server you use refuses to forward mail, so it can be solved by using the SMTP server designated by the provider who provides your Internet service.
Third, there is a transaction error and you can't send an email.
This is an SMTP server-side problem. You should contact the ISP that provides mail service for you. It is possible that the service refused to accept your mail.
Fourth, anti-virus software will also affect the sending or receiving of e-mail.
If you have installed Norton Antivirus 2000, it is recommended to disable (or not install) its Email Protection function Email Protection, which may interfere with the sending and receiving of emails. (If you use other anti-virus software, it is also recommended to disable similar functions.) Go to Tools-Accounts-Mail, select the email account used when the error occurs, and press Content. Enter the "server" page, and change the127.0.01of POP3 (if you have the anti-virus mailbox protection function, POP3 will be changed to127.0.01,and the account will be changed) back to your original POP3 server address. After disabling Email Protection, see if you can send emails normally.
Five, check whether the system has been poisoned (such as Happy 99 virus).
The 6.Folders.dll file is damaged or read-only, which makes it impossible to send letters.
Why is the letter I read automatically deleted?
I found that the letter I read would be deleted automatically. Why?
In fact, it has not been deleted, because Outlook Express does not have this function at all, but you may have changed the "View" setting and set Outlook Express to display only unread mail.
Enter the view-current view, and check whether it is set to "Show all messages". If set to "Show all messages", all messages will be displayed. If you hide the read mail, the read mail will be automatically hidden, giving you the illusion that the mail has been deleted.
Outlook cannot open the attached document directly.
When you want to open the email attachment file, an error message will appear (for example, c:\ Windows\temp\xxxx.xls cannot be opened), and you must save it before opening the attachment.
I think the main reason is that your TEMP folder under Windows has been deleted. Rebuilding a folder named TEMP under the Windows folder can solve this problem.
The main function of TEMP folder is to store temporary files and a temporary replacement space, but sometimes the contents will not be emptied automatically after use. Remember to clean it yourself when you have time. Everything in temp can be deleted, and it won't and can't have any bad influence on the computer.
However, it should be noted that the contents of the TEMP can be deleted, but the TEMP itself should not be deleted, because the default TEMP path of Windows is \ Windows\ TEMP. If you delete TEMP, Windows will not know where to throw some temporary files, which is easy to cause problems.
When I receive an email, I always get an error message.
Every time you receive an e-mail, an msimn will cause an invalid page fault in modulmshtml.dll, and Outlook Express will automatically close. I don't know the real reason, but I tried to temporarily disable the mail rules (maybe some BUG… in the mail rules …). First, disable all mail rules, and then restore mail rules after receiving all letters. How to temporarily disable mail rules? Is there any other way?
In Outlook Express, go to Tools, Mail Rules and Mail, remove the checkmark before each rule, and then press OK. Then scan "send/receive" to receive your emails, and then check them back one by one (you decide according to your own needs).
If disabling e-mail rules still doesn't solve the problem, please try the following methods again, but there is no guarantee that they will be useful.
First, enter regsvr32 MSHTML.DLL in Start and Run to re-register mshtml.dll, but this method may not be effective. I just want you to know that there is such a way.
Second, if anti-virus software is installed, suspend the anti-virus software first to see if it is caused by anti-virus software interference.
What is the purpose of the system account?
What is the purpose of setting up some system accounts in the directory service under OE5.0 account?
These accounts are automatically introduced after installing IE5.0. You can directly query users online through these accounts, and you can also use your name or email address for further query. How to use:
1, press Edit-Find User;
2. Select the server to search in the query;
3. You can enter a person's name or email address as the keyword of the query;
4. Press "Find Now".
It is forbidden to send and receive new mail automatically.
Why does OE 5.0 send and receive new emails by itself when I start?
This is because you have enabled the function of sending and receiving emails when OE5.0 started. Go to Tools-Options-General tab and uncheck the item "Send and receive mail at startup".
Let Outlook Express pop up and enter the password.
How can I set it to make Outlook Express pop up the password box?
The default setting of Outlook Express is not to pop up the password, and the password you entered when creating the account will be remembered by Outlook Express as the default value. Outlook Express can easily pop up the password input box. In Outlook Express, select Tools, select the Mail tab, select your account, click the Properties button, select the server in the pop-up dialog box, delete the asterisk in the password box and confirm. When "send and receive" again, the password input box will pop up.
Foxmail can't be opened in Outlook?
I use Foxmail3.0 to receive mail, and I want to open some files with Outlook Express 2000. With it, what should I do if the import and export function of Outlook Express 2000 is useless?
You can use Foxmail3.0 to export the email to the EML format of Outlook, and then drag the email directly into the Outlook window to view the file contents.
Outlook Express will disconnect when sending and receiving messages.
I was disconnected as soon as I used Outlook Express to send and receive e-mail. Why?
You can open the Outlook Express tool-Options-General-Send/Receive E-mail without checking the box in front of "Check E-mail every XX minutes".
How to send an email to someone who doesn't have a Chinese platform?
I use Outlook Express to send an email to an American friend. If he wants to see the content displayed in Chinese, how should he set it in the email?
If the other party does not have a Chinese platform, it doesn't matter how you set it up. You just need to finish writing the email, grab the screen, save it as a picture with image processing software and send it as an attachment.
After installing IE, Outlook Express appears garbled.
Why is it that after installing IE, the email received in OE or the content when using newsgroups are garbled, but the code is displayed in Chinese?
Please directly select "International Settings" under "Tools"-"Options"-"Reading" in OE, and select the "Use default encoding for all incoming and outgoing mail" check box.
SMTP, POP3 and reloading system problems
I have a Hotmail mailbox, but I don't know what its SMTP and POP3 are, so I can't send and receive emails with Foxmail. Can you tell me? Besides, I want to reinstall. How to easily back up important communication information of Foxmail?
Hotmail's free mailbox cannot provide POP3 service, which is a free service that only provides web mail. You can only use WWW browser to send and receive e-mail, but you don't support POP3 protocol, so you can't use the usual e-mail software to send and receive e-mail. As for SMTP, I suggest you use your local SMTP server, which is fast and can send letters to the destination mailbox. Why go far? As for the problem of restoring Foxmail configuration after reinstalling the system, take a closer look and you will find a Foxmail.ini file in the installation directory of Foxmail. Open it and you will know everything. After reinstalling the system, you only need to create a shortcut for Foxmail.EXE to use. All emails, email names and email folders can be kept intact.
Reasons for Foxmail's Slow Exit and Crash
I have been using Foxmail to send and receive emails. I find that sometimes its exit speed is very slow. After an exit crash, all the inboxes were lost. Why?
When receiving or sending a large number of emails, that is, the inbox or outbox is very large, the system will compress the inbox when exiting Foxmail. This process is slow and requires some free space on the current disk. If this process is interrupted or the hard disk space is insufficient, it will lead to the tragedy of data loss. We should always sort out letters and delete those that don't need to be saved in time.
Outlook often disconnects.
There is something wrong with my point of view recently. When I opened it, I immediately jumped out of the "Pull Link" box. If I am online, I will disconnect immediately. If I am not online, I can't connect. In a word, my outlook is a vase now, so it can't be used?
You can find your email account in the tool, go to "Properties" and have a "Connect" item. Just connect to the Internet manually and see if you can find items that you use frequently when connecting to this account. If you set this as your most commonly used dialing number, there will be no problem.
Prevent spam
There is more and more junk information, and I don't know where it comes from. How to see the whole picture of the header information in OE5 (English version OE5(IE5.5), so as to know the source of the mail?
Right-click this email to view its properties, and click Details to view all information about this email. However, unless the spammer specifically leaves his own address, spam will generally not leave you useful information. If you don't want to receive spam from others, don't expose your address in public forums.
Method of adding pictures to e-mail
How to add a picture (not an attachment) to an email? After copying the original image, it cannot be pasted.
You must write the email in HTML format. You can write HTML code first, and then paste it into email software that supports writing HTML format. After testing, Outlook can work, but Foxmail can't.
Set up a free email connection in Outlook.
Why can't the free email I applied for online be used in Outlook? How do I set up to receive mail after applying for a free mailbox? Maybe I didn't set it up.
First of all, when you log on to the website that provides free email, you should apply step by step according to its prompts, write down your password and the information needed to change it (usually a question and answer) and the POP3 address it provides, to ensure that the message "application succeeded" appears in the last step, otherwise start again; Establish a new connection in your email software, set up the account, password and POP3 address you just applied for, and after a period of time (from 1 minute to one day depending on the website), log in to that website directly to see if the password is correct, and then modify it. Set a POP server (receiving) and an smtp server (sending) in Foxmail or Outlook Express. For example, your email address is 888@263.net, POP is 263.net, SMTP is smtp.263.net, your email address is 888 @ 2 1cn.com, POP is 3.2 1cn.com, and SMTP is SMTP.200000.
Protect the mailbox and hide the letter.
How to hide the sender's address when sending a letter? Or use another address instead? I want to protect my public mailbox.
The simplest method SMTP default settings do not fill in what your ISP provides, and use free email or anonymous email software. In addition, you can select Tools/Accounts from the menu of Outlook Express to clear all user information (name, company, email address and recovery address) in the email account properties. The method is to hold down the Ctrl key and press Backspace or Delete to delete. It's easier to change to another address, just modify the user information.
How to make the mailbox not accept unwanted mail?
How to make the mailbox not accept unwanted mail?
Usually, the mailbox provided by telecom does not support automatic rejection of spam, so you can consult telecom. Another method is to apply for a webpage mailbox on the Internet (such as sina.com.cn), and use its own spam function to reject similar emails when they are sent to the mailbox, so that the paid service will be better, easier and safer. (163. net)
What is the default way for Foxmail to send mail?
Is there any way to send Foxmail by default?
In IE, clicking an email address with the mouse will automatically call Foxmail to send an email. In Options-Network, you can set to check whether Foxmail is the default email software every time you start it. When starting Foxmail in this way, if Foxmail is not the default email software of the system, a dialog box will pop up asking whether Foxmail is set as the default email software and whether E-mail is set as the default soft, so that when the system encounters a website similar to mailto:, it will automatically open Foxmail for processing. For example, from the "Start"-"Run" dialog box of Windows 98, write :Mailtomyname@host.com, and then confirm, Foxmail will open, and the recipient column will be filled with myname@host.com. You can also set Foxmail as the default email software in IE's "Options".
Outlook Express always pops up a window showing that msimn.exe has made an error and needs to restart the program.
There are many reasons why Outlook Express can't run smoothly. File corruption, viruses and even some software drivers can cause Outlook Express to fail to start or generate errors.
1, check whether the remaining hard disk space is enough.
2. Check whether the folder name of Outlook Express under the program file is correct. If not, please change it back to Outlook Express.
3. Check whether you are infected with the virus.
4. Reinstall after deletion.
Why does reading crash after receiving mail with Outlook Express?
Why does Outlook Express crash when reading after receiving an email?
First of all, let's understand the composition of OE mailbox. Each mailbox in OE consists of two parts, one is the data index file, and the other is the real finishing touch, which is used to store the mail content. When we delete the mail, we only delete the mail index file, but we don't really delete the mail data (which is why the deleted mail can be recovered). When OE starts, you must read the index data of the corresponding mailbox, but when the index data of the email is too large, the reading data may be wrong, which is why you will crash when you click on an email. The solution is simple, clean the mailbox.
How to get rid of automatic passwords? What should I do now if I want to get rid of it?
Take Outlook Express as an example, open the menu tool-Account-Properties-Server, and just cancel the remembered password.
There is garbled code when sending and receiving e-mail.
Garbled when sending and receiving e-mail?
Click the "Coding" option, and try some related codes such as "Traditional Chinese" or "Simplified Chinese HZ". Generally, it can be solved.
How does Outlook set a password
The method of setting the password is as follows: We right-click Outlook Today Personal Folder, select Personal Folder Properties, click Advanced button in the Personal Folder Properties dialog box to enter the Personal Folder dialog box, click Change Password button, enter the password to be set in the new password and verification password text boxes in the Change Password dialog box, and then click.
The next time you start Outlook, a dialog box will pop up. Because Outlook will open the Outlook Today personal folder when you start Outlook, we must enter the password of the personal folder. After entering, click OK to start Outlook. With this function, you don't have to worry about being peeked by others after setting the password. We can add passwords to all personal folders to enhance the security of Outlook. When you open a personal folder with a password, you must provide the password correctly.