Laserjet 1000 printer itself does not support * * * sharing, so it is not recommended that you use it through * * * sharing connection. If you use a printer shared by * * *, you can't guarantee the stability and compatibility.

* * * The method of installing the driver on the printer client is basically the same, and the steps are as follows:

In Start \ Settings \ Printers, double-click Add Printer. Next, select the local printer connected to this computer (automatically detect and install the plug-and-play printer without selecting it). Next, select "Local Port" in Create a new port, enter: \ \ Host name \ printer's * * name, and click Next when prompted. Click Have Disk, then click Browse, select the downloaded and unzipped folder, and select *. Inf file, click OK, click Next, follow the prompts to install (if the digital signature fails, select Continue), and finally print the test page.

However, because the laserjet 1000 printer itself does not support * * * sharing, it is impossible to guarantee that the printer can print normally after installing this method.

If you can't use the xp system C machine at present, it is suggested to connect the printer and the C machine directly with usb cable, and then test whether the printing is normal after installing the driver.

If the above information can help you solve the problem, it is recommended to use it so that customers can solve the same problem in the future.

If the problem has not been solved, it is recommended to continue asking questions. We will continue to help you answer your questions after receiving them.