Some blue screens are caused by hardware incompatibility. Generally, there will be no problem after restarting. The following are some situations of blue screens.

[b]23. 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED[/b]

◆Error analysis: The kernel-level application generated an error, but the Windows error handler did not capture it. Usually the hardware is compatible Sexual error.

◇Solution: Upgrade the driver or upgrade BIOS.

Blue screen meaning

1. Fault check information

* **STOP 0x0000001E(0xC0000005,0xFDE38AF9,0x0000001,0x7E8B0EB4)

KMODE_EXCEPTION_NOT_HANDLED ***The first part of the error is the Stop Code (Stop Code), which is STOP 0x0000001E, used to identify the type of error that has occurred. The second part of the error is a set of four numbers enclosed in parentheses, representing random developer-defined parameters (this parameter is simply incomprehensible to ordinary users, only [url=/view/1048.htm][color=#0000ff] Only driver[/color][/url] writers or Microsoft operating system developers will understand). The third part is the error name. The first line of information is usually used to identify the driver or device that produced the error. Most of this information It is very simple, but the stop code can be used as a search term in the Microsoft Knowledge Base and other technical materials

2. Recommended actions

The second part of the blue screen is the recommended operation information for the user. Sometimes, the recommended actions are just general suggestions (for example: go to the seller's website to find [url=/view/361.htm][color=#0000ff]BIOS[/color][/url] updates, etc.); sometimes , that is, display a prompt related to the current problem. Generally speaking, the only suggestion is to restart.

3. Debugging [url=/view/1075.htm][color=#0000ff]Port[ /color][/url] tells the user whether the memory dump image has been written to the disk vendor. Using [url=/view/1082.htm][color=#0000ff]memory[/color][/url] dump image can Determine the nature of the problem and also tell the user whether the debugging information was sent to another computer vendor and what port was used to complete the communication. However, the information here is meaningless to ordinary users. Sometimes the security department It can successfully find out which production group has the problem, and will clearly report which file made the error in the first part, but often it can only check the general scope, and cannot clearly indicate the problem. Because the factory is forced to stop, Only by reorganizing and starting work, sometimes the production team will realize the mistake and will not make it again. But sometimes it will still try to snatch parts, so the factory leader has to repeat the decision to stop production (it cannot start and displays a blue screen message, or it fails again when performing the same operation) A blue screen appears).

[[url=/view/20772.htm#][color=#800080]Edit this paragraph[/color][/url]]

Blue screen There is a lot of information about Windows 2K/XP blue screen, which cannot be fully explained in one article, but their causes are often concentrated on incompatibility[/color] [/url][url=/view/25278.htm][color=#0000ff]Hardware[/color][/url] and drivers, problematic [url=/view/37.htm][color= #0000ff]Software[/color][/url], [url=/view/2584.htm][color=#0000ff]Virus[/color][/url], etc., so we first provide you with some general solutions Solution, when encountering a blue screen error, you should first

Follow these plans to eliminate.

[b]1.[/b][url=/view/771813.htm][b][color=#0000ff]Restart[/color][/b] [/url]

Sometimes it is just a program or driver that makes a mistake temporarily, and they will correct it after restarting. (Note: See 7. Querying the shutdown code at this time)

[ b]2. New hardware[/b]

First of all, you should check whether the new hardware is plugged in securely. This problem that many people ignore often causes many inexplicable failures. If it is confirmed that there is no problem, unplug it Next, try another slot and install the latest driver. At the same time, you should also check whether the hardware is compatible with the [url=/view/880.htm][color=#0000ff]operating system[ /color][/url] compatible. If your hardware is not in the list, then go to the hardware manufacturer's website to check, or call their consultation phone number.

[b]3. New drivers and new Services[/b]

If you have just installed a new driver for a certain hardware, or installed a certain software, and it has added corresponding items to the system services (for example: anti-virus software, [url= /view/2089.htm][color=#0000ff]CPU[/color][/url] Cooling software, [url=/view/3067.htm][color=#0000ff]Firewall[/color][/url] software, etc.), if a blue screen failure occurs during restarting or use, please go to [url=/view/1062.htm][color=#0000ff]Safe Mode[/color][/url][url=/view/386432 .htm][color=#0000ff]Uninstall[/color][/url] or [url=/view/657791.htm][color=#0000ff]Disable[/color][/url] them.

[b]4. Check for viruses[/b]

Viruses such as shock wave and oscillation wave sometimes cause Windows blue screen of death, so virus checking is essential. At the same time, some [url=/view /931.htm][color=#0000ff]Trojan[/color][/url]Spyware can also cause blue screens, so it is best to use relevant tools to scan and check.

[b]5. Check BIOS and hardware compatibility[/b]

For newly installed computers, blue screen problems often occur, you should check and upgrade the BIOS to the latest version, and close the memory-related items, such as: [url=/view /907.htm][color=#0000ff]caching[/color][/url] and [url=/view/21249.htm][color=#0000ff]mapping[/color][/url]. In addition, it should Check your own hardware against Microsoft's hardware compatibility list. Also, if the motherboard BIOS cannot support large-capacity hard drives, it will also cause a blue screen and needs to be upgraded.

[b]6. Run "sfc / scannow" to check whether the system files have been replaced, and then use [/b][b]system installation disk[/b][b] to restore.[/b]

[b]Tips:[ /b]

BIOS cache and mapping items

Video BIOS Shadowing (video BIOS mapping)

Shadowing address ranges (mapping address columns)

System BIOS Cacheable (system BIOS buffer)

Video BIOS Cacheable (video BIOS buffer)

Video RAM Cacheable (video memory buffer)

[b ]7.Check[/b][url=/view/1

270588.htm][b][color=#0000ff]System log[/color][/b][/url]

At the beginning-->[url=/view/102616.htm][ color=#0000ff]Menu[/color][/url] Enter: EventVwr.msc, press Enter and "[url=/view/1035.htm][color=#0000ff]Event Viewer[/color][/ url]", pay attention to check the items indicating "error" in the "System Log" and "Application Log".

[b]8. Query the shutdown code[/b]

< p>Write down the dense E-texts on the blue screen, then go online on another computer, enter the Microsoft Help and Support website?, enter the shutdown code in "Search (Knowledge Base)" in the upper left corner, if the search results do not find suitable information, You can choose "English Knowledge Base" to search again. Generally, you will find useful solution cases here. In addition, at [url=/view/1282.htm][color=#0000ff]baidu[/color][/ url], [url=/view/105.htm][color=#0000ff]Google[/color][/url] and other search engines use the blue screen stop code or the following description text as a keyword search, and often also Good results.

[b]9.[/b][b]Last correctly configured[/b]

Generally, blue screens are caused by hardware drivers or newly added After installing the hardware and installing the driver, the "Last Known Good Configuration" provided by Windows 2K/XP is the shortcut to solve the blue screen. Restart the system, press the F8 key when the startup menu appears, the advanced startup options menu will appear, and then select " Last known good configuration".

[b]10. Install the latest[/b][url=/view/2058504.htm][b][color=#0000ff]system patch[/color] [/b][/url][b]And Service Pack[/b]

Some blue screens are caused by defects in Windows itself, which can be solved by installing the latest system patches and Service Packs.

[[url=/view/20772.htm#][color=#800080]Edit this paragraph[/color][/url]]

Blue screen code meaning and solution It is common for a blue screen to appear when using Windows, and often because the source of the error is not clear, the system needs to be reinstalled frequently, which is time-consuming and laborious. The following has collected some Windows crash passwords for your reference.

[b]1. 0x0000000A: IRQL_NOT_LESS_OR_EQUAL[/b]

◆Error analysis: Mainly caused by problematic drivers, defective or incompatible hardware and software. From a technical point of view. Indicates that there are levels [url=/view/19746.htm][color=#] in [url=/view/493695.htm][color=#0000ff]kernel mode[/color][/url] 0000ff]The process[/color][/url] requested (IRQL) to access a memory address that it does not have permission to access.

◇Solution: Please use 2, 3, 5, and 2 of the previously introduced solutions. Try to eliminate solutions 8 and 9.

[b]2. 0x00000012:TRAP_CAUSE_UNKNOWN[/b]

◆Error analysis: If you encounter this error message, it is unfortunate, it should be The result of KeBudCheck analysis is that the cause of the error is unknown.

◇Solution: Since Microsoft cannot help, you have to rely on yourself. Please carefully recall when this error occurred. ; what operations you did on the system when it first occurred; what operations were being performed when it occurred. Find out the possible causes from this information, and then choose corresponding solutions to try to eliminate them.

[b] 3. 0x0000001A: MEMORY_MANAGEMENT[/b]

◆Error analysis: This memory management error is often caused by hardware, such as: newly installed hardware, problems with the memory itself, etc.

◇Solution: If it appears when installing Windows, it may be because your computer does not meet the minimum memory and [url=/view/157418.htm][color=#0000ff]disk[/color] for installing Windows. [/url]Requirements.

[b]4. 0x0000001E:KMODE_EXCEPTION_NOT_HANDLED[/b]

◆Error analysis: The Windows kernel has detected an illegal or unknown process [url=/ view/178461.htm][color=#0000ff]command[/color][/url], this stop code is usually caused by the problem of memory or similar reasons to the previous 0x0000000A.

◇ Solution:

(1) There is a problem with hardware compatibility: Please check the latest hardware compatibility list mentioned above to see if all hardware is included in the list.

(2) Problematic device drivers, system services, or memory and interrupt conflicts: If the driver's name appears in the blue screen message, try disabling or removing the driver in installation mode or recovery console, and disable all newly installed Drivers and software. If the error occurs during system startup, please enter safe mode and rename or delete the file indicated in the blue screen message.

(3) If the error message clearly indicates Win32K.sys : It is most likely caused by third-party remote control software. You need to shut down the service for this software from the recovery console.

(4) Appears when restarting for the first time after installing Windows: The biggest suspect It is possible that there is insufficient disk space in the system partition or there is a problem with BIOS compatibility.

(5) If it occurs when closing a certain software: It is very likely that the software itself has a design flaw, please upgrade or uninstall it It.

[b]5. 0x00000023:FAT_FILE_SYSTEM[/b]

[b]0x00000024:NTFS_FILE_SYSTEM[/b]

◆Error analysis: 0x00000023 Usually occurs when reading and writing the system partition of the FAT16 or FAT32 file system, and 0x00000024 is due to an error in the NTFS.sys file (the function of this driver file is to allow the system to read and write. (NTFS

file system disk). These two blue screen errors are most likely caused by physical damage to the disk itself, or damage to the interrupt request packet (IRP). Other reasons include: hard disk [url=/view/84.htm] [color=#0000ff]There are too many disk fragments[/color][/url]; file read and write operations are too frequent, and the amount of data is very large or caused by some disk imaging software or anti-virus software.

◇Solution:

Step 1: First open the command line prompt and run "Chkdsk /r" (Note: It is not CHKDISK, it feels like this, but the content they refer to is different) Use the command to check and repair hard disk errors. If bad tracks are reported, please use the check tool provided by the hard disk manufacturer to check and repair.

Step 2: Then disable all software that scans files. For example: anti-virus software, firewall or [url=/view/235162.htm][color=#0000ff]backup[/color][/url] tool.

Step 3: Right-click C:\ winnt\system32\drivers\fastfat.sys file and select "Properties" to check whether its version is consistent with the Windows version used by the current system. (Note: If it is XP, it should be C:\windows\system32

\drivers\fastfat.sys)

Step 4: Install the latest motherboard driver, especially the IDE driver. If your [url=/view/17206.htm][color=#0000ff Drivers are also provided for optical drives[/color][/url] and removable storage. It is best to upgrade them to the latest version.

[b]6. 0x00000027:RDR_FILE_SYSTEM[/b]

◆Error analysis: The cause of this error is difficult to determine, but there is a problem with Windows memory management that may cause this stop code to appear.

◇Solution: If it is memory management Because of the problem, usually increasing the memory will solve the problem.

[b]7. 0x0000002EATA_BUS_ERROR[/b]

◆Error analysis: System memory memory parity error occurs, usually because When a device driver accesses a non-existent memory address due to defective memory (including physical memory, L2 cache, or [url=/view/2882.htm][color=#0000ff]graphics card[/color][/url] video memory) Caused by other reasons. In addition, the hard disk is damaged by viruses or other problems, so this stop code appears.

◇Solution:

(1) Check for viruses

< p>(2) Use the "chkdsk /r" command to check all disk partitions.

(3) Use memory testing software such as Memtest86 to check the memory.

(4) Check whether the hardware is correct Installation, such as: whether it is firm and whether the gold finger is stained.

[b]8. 0x00000035:NO_MORE_IRP_STACK_LOCATIONS[/b]

◆Error analysis: Literally understood, it should be There is a stack problem with the driver or some software. In fact, the real cause of this failure should be a problem with the driver itself, or a quality problem with the memory.

◇Solution: Please use the conventional solutions introduced earlier Exclude solutions related to drivers and memory.

[b]9. 0x0000003F:NO_MORE_SYSTEM_PTES[/b]

◆Error analysis: A problem related to system memory management Errors, such as: memory management problems due to performing a large number of input/output operations: a defective driver incorrectly uses memory resources; an application (such as backup software) is allocated a large amount of kernel memory, etc. .

>◇Solution: Uninstall all newly installed software (especially those that enhance disk performance and anti-virus software) and drivers.

[b]10, 0x00000044:MULTIPLE_IRP_COMPLIETE_REQUESTS[/b]

p>

◆Error analysis: usually caused by hardware drivers.

◇Solution: Uninstall the recently installed driver. This fault rarely occurs. It is known that when using www.in-system.com/ Certain software from this company will appear from time to time, and the culprit among them is the Falstaff.sys file. (The author is not afraid of lawsuits, so he published the company's website address)

[b ]11. 0x00000050: PAGE_FAULT_IN_NONPAGED+AREA[/b]

◆Error analysis: problematic memory (including physical memory, second-level cache, video memory), incompatible software (mainly remote control and anti-virus software), damaged NTFS volumes and problematic hardware (for example: the PCI card itself is damaged), etc. can cause this error.

◇Solution: Please use the conventional solution introduced earlier and the memory , software, hardware, hard disk and other related solutions to exclude.

[b]12. 0x00000051: REGISTRY_ERROR

[/b]◆Error analysis: Description of this stop code [url= /view/979.htm][color=#0000ff]An error occurred in the registry[/color][/url] or the system configuration manager. The hard disk itself was physically damaged or there was a problem with the file system, causing the registration file to be read. An input/output error occurs.

◇Solution: Use "chkdsk /r" to check and fix disk errors.

[b]13, 0x00000058: FTDISK_INTERNAL_ERROR[/b] < /p>

◆Error analysis: It means that an error occurred in the main driver of the fault-tolerant set. ?

◇Solution: First try to restart the computer to see if the problem can be solved. If not, try "last time" Correct configuration" to solve.

[b]14. 0x0000005E: CRITICAL_SERVICE_FAILED[/b]

◆Error analysis: Caused by the startup identification of a very important system service.

[b] p>

◇Solution: If a new piece of hardware is installed and a new piece of hardware is installed, you can first remove the piece of hardware and check whether it is compatible with Windows 2K/XP through an online list, and then start the computer. If a blue screen appears If it still appears, please use "Last Known Good Configuration" to start Windows. If this still fails, it is recommended to perform a repair installation or reinstall.

[b]15, 0x0000006F:SESSION3_INITIALIZATION-FAILED[/b]

◆Error analysis: This error usually occurs when Windows starts, usually caused by problematic drivers or damaged system files.

◇Solution: It is recommended to use Windows Use the installation CD to repair and install the system.

[b]16, 0x00000076ROCESS_HAS_LOCKED_PAGES[/b]

◆Error analysis: Usually it is because a driver completes an input/output After the operation, the occupied memory was not released correctly

◇Solution:

Step 1: Click Start-->Run: regedt32, find [HKLM\SYSTEM\Currentcontrol set\ control\session manager\memory management], create a new double-byte value "TrackLockedPages" on the right, with a value of 1. In this way, Windows will track which driver is the problem when the error occurs again. Step 2:

If a blue screen appears again, the error message will become: STOP:0x0000000CB(0xY,0xY,0xY,0xY)DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS. The fourth "0xY" will be displayed as the name of the problem driver, and then update or delete it. Chapter 1 Step three: Enter the registry and delete the added "TrackLockedPages".

[b]17, 0x00000077: KERNEL_STACK_INPAGE_ERROR[/b]

◆Error analysis: Explain the kernel data that needs to be used Not found in virtual memory or physical memory. This error is often caused by disk problems, corresponding data corruption or virus erosion.

◇Solution: Use anti-virus software to scan the system; use the "chkdsk /r" command Check and repair disk errors. If not, use the tools provided by the disk manufacturer to check and repair.

[b]18. 0x0000007A: KERNEL_DATA_INPAGE_ERROR[/b]

◆Error analysis: This error It is often caused by the inability to read the kernel data in the virtual memory into the memory. The reason may be that there is a bad cluster virus in the virtual memory page file, a disk controller error, or a memory problem.

◇Solution: First use Upgrade to the latest virus database anti-virus software to check for viruses. If there are 0xC000009C or 0xC000016A codes in the information, it means that it is caused by a bad cluster, and the system's disk detection tool cannot automatically repair it. At this time, you need to enter the "Failure Recovery Console". Use the "chkdsk /r" command to perform manual repair.

[b]19, 0x0000007B:INACESSIBLE_BOOT_DEVICE[/b]

◆Error analysis: Windows cannot access the system partition during the startup process Or boot volume. Generally occurs when starting up for the first time after replacing [url=/view/1143.htm][color=#0000ff]motherboard[/color][/url], mainly because of the difference between the new motherboard and the old motherboard[ url=/view/489796.htm][color=#0000ff]IDE controller[/color][/url] is caused by using different chipsets. Sometimes it may also be caused by viruses or hard disk damage.

◇Solution: Generally, just start the computer with the installation CD, and then perform a repair installation to solve the problem. For viruses, you can use [url=/view/365.htm][color=#0000ff]DOS[/color] [/url] version of the anti-virus software (kv2005DOS version is available for download). If there is a problem with the hard disk itself, please install it on another computer, and then use "chkdsk /r" to check and repair disk errors.

[b]20. 0x0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED[/b]

◆Error analysis: The system process generates errors, but the Windows error handler cannot catch them. There are many reasons for them, including: hardware compatibility performance, problematic drivers or system services, or some software.

◇Solution: Please use the "Event Viewer" to get more information and discover the source of the error. (It seems that This is not a solution, it seems that everyone here has to rely on their own efforts!)

[b]21. 0x0000007F:UNEXPECTED_KERNEL_MOED_TRAP[/b]

◆Error analysis: usually due to problematic hardware (For example: memory) or caused by certain software. Sometimes [url=/view/870.htm][color=#0000ff]overclocking[/color][/url] will also produce this error.

◇Solution: Use detection software (for example: Memtest86) to check the memory. If overclocking is performed, please cancel the overclocking. Change the PCI

Unplug the hardware card from the motherboard slot, or replace the slot. In addition, after some motherboards (such as nForce2 motherboards) are overclocked, the south bridge chip will overheat and cause a blue screen. At this time, adding a separate heat sink for the chip can often be Effectively solve the problem.

[b]22, 0x00000080:NMI_HARDWARE_FAILURE[/b]

◆Error analysis: It is usually caused by hardware. (It seems that there is a difference between blue screen and hardware error.

◇Solution: If new hardware has been installed recently, please remove it, then try changing the slot and installing the latest driver. If the driver has been upgraded, please restore the original version; check whether the memory gold finger is contaminated or damaged; scan for viruses; run "chkdsk /r" to check and repair disk errors; check that all hardware cards are inserted securely. If the above attempts are ineffective, you have to find a professional computer The maintenance company requested help.

[b]23. 0x0000008E: KERNEL_MODE_EXCEPTION_NOT_HANDLED[/b]

◆Error analysis: The kernel-level application generated an error, but the Windows error handler did not Capture. Usually a hardware compatibility error.

◇Solution: Upgrade the driver or upgrade BIOS.

[b]24, 0x0000009C:MACHINE_CHECK_EXCEPTION[/b]

◆Error analysis: Usually caused by hardware. It is usually due to overclocking or hardware problems (memory, CPU, bus, power supply

power supply).

◇Solution : If overclocking is performed, please lower the original frequency of the CPU and check the hardware.

[b]25, 0x0000009FRIVER_POWER_STATE_FAILURE[/b]

◆Error analysis: Often related to the power supply, often Occurs during power-related operations, such as: shutdown, standby or hibernation.

◇Solution: Reinstall the system. If this does not solve the problem, please replace the power supply.

[b] 26. 0x000000A5: ACPI_BIOS_ERROR[/b]

◆Error analysis: Usually it is because the motherboard BIOS cannot fully support [url=/view/267726.htm][color=#0000ff]ACP[/color][ /url]I specification.

◇Solution: If there is no corresponding BIOS upgrade, then when installing Windows 2K/XP, when "press F6 if you need to install a third-party SCSI or RAID" appears driver" prompt, press the F7 key, so that Windows will automatically disable the installation of ACPI HAL and install the Standard PC HAL.

[b]27, 0x000000B4: VIDEO_DRIVER_INIT_FAILURE

[/ b]◆Error analysis: This stop message means that Windows cannot enter the [url=/view/1186818.htm][color=#0000ff]graphical interface[/color][/url] because it cannot start the graphics card driver. Usually it is the graphics card. problem, or there is a hardware conflict with the graphics card (such as a conflict with the parallel or serial port).

◇Solution: Enter safe mode to see if the problem is resolved. If possible, please upgrade to the latest graphics card driver, if it still doesn't work, it is likely that there is a conflict between the graphics card and the parallel port. You need to press the WIN+break key combination in safe mode to open "System Properties", find and double-click the connection to print in Hardware-->Device Manager For LPT1 port options, uncheck "Use automatic configuration" in the "Resources" tab, and then change "03BC" in "Input/Output Range" to "0378".

[b] 2

8. 0x000000BE:ATTEMPTED_WRITE_TO_READONLY_MEMORY

[/b]◆Error analysis: A driver tried to read-only memory [url=/view/93260.htm][color=#0000ff][/color][ /url] is caused by writing data. Usually it is after installing a new driver, system service or upgrading the device's firmware program.

◇Solution: If the error message contains a driver or service file name, please uninstall or disable the newly installed driver or software based on this information.

38. If these blue screen stop codes appear when starting Windows

If when Windows starts If a blue screen appears and the error message in Appendix 1 appears, there is most likely a problem with the hardware. Please use the diagnostic tool provided by the hardware manufacturer to determine whether there is a problem with the hardware, and go to its website to check whether there is the latest BIOS or firmware update program. . If there is no problem with the hardware, reinstall Windows 2000 ~ XP

[[url=/view/20772.htm#][color=#800080]Edit this paragraph[/color][/url]] < /p>

XP Shutdown Blue Screen Analysis Comprehensive 1. Windows XP system bug causes shutdown blue screen

Windows XP has a shutdown fault bug. If your computer often displays a shutdown blue screen during the shutdown process, and The fault is intermittent, and there is no response when pressing the "Ctrl+Alt+Delete" keys, so it is certain that your system has not been patched. Please download the SP1 patch package and patch it, and it will usually be fine.

2. The sound card driver causes a blue screen during shutdown

If you are using an innovative sound card and a blue screen appears during the shutdown process, and the error code is "0X0000000A", then please enter the device management remove the sound card, refresh it, and manually install the latest driver with a digital signature.

3. Logitech mouse and keyboard are not perfect, resulting in a blue screen when shutting down

If you are using Logitech’s network keyboard and have installed the Key Commander software to drive the corresponding network functions of the keyboard, then It may cause a shutdown to turn into a restart failure. If the driver of your Logitech mouse is MouseWare8.6, it will cause a blue screen failure when shutting down. You can only solve the problem by uninstalling the driver. >>Blue screen code 0x000000D1