Road construction is a practical project for the people, which lays the foundation for the development of rural areas to cities. How to write the road construction contract? The following is a model contract for road construction that I compiled for you. Thank you for reading it.

Model essay 1 on road construction contract

According to the poor actual situation of roads in our village, after discussion and approval by the representative meeting, a standard gravel road will be built from our village to Xiaosijia boundary, which will be contracted out by the village committee through public bidding. Shengli Village is Party A and Yan Li is Party B.. The following contract is formulated through negotiation between both parties.

1. The gravel road from the village department to Xiaosijia boundary is 7 kilometers long.

second, the quality standard must reach 7 meters wide, 25 centimeters thick, and the side ditch is 1 meter wide and 8 centimeters deep.

iii. contracting cost: the project investment is 98,2 yuan, and Party B shall be responsible for the gravel and sand.

4. The time for contracting road repair, which must be completed from October 2, 2 to October 3, 2, is waiting for the acceptance of the village level.

5. During the road construction, the construction must be carried out as required, and safety should be paid attention to. In case of any accident, Party B shall be responsible for solving it.

VI. Liability for breach of contract. Both parties to the contract must abide by the terms of the contract and complete the project on time. Party A has the right to refuse to pay part of the contract fee as maintenance fee.

VII. This contract is made in triplicate, one for Party A and Party B and one for the township government, and shall come into effect from the date of signing.

party a (official seal): _ _ _ _ _ _ party b (official seal): _ _ _ _ _ _

legal representative (signature): _ _ _ _ _ _ _ legal representative (signature) : _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ According to the relevant provisions of the Economic Contract Law, combined with the characteristics of this project, and through full consultation between Party A and Party B, this contract is specifically concluded as follows:

1. Project construction project and content

According to the construction content and project construction plan of this project, the total length of the project section is kilometers, the road width is 4m, and the thickness is 2cm.

ii. project cost and contracting method

the project cost is contracted to party b for implementation according to the design kilometer and the project cost is RMB. The settlement shall be carried out according to the actual completed quantities.

iii. Engineering quality requirements and paving technology

1. Party B shall organize the construction in strict accordance with the technical standards of gravel road engineering and technical specifications of engineering construction, take full responsibility for the quality of the project undertaken, and must reach the qualified project. According to the "gravel road quality inspection evaluation standard" acceptance.

2. Party B must accept the supervision and management of Party A and the transportation department. Any violation shall be regarded as a breach of contract, and all the adverse consequences and responsibilities arising therefrom shall be borne by Party B..

3. Party B must carry out standardized construction in strict accordance with the construction procedures. After the final project is completed, the construction unit and the district will reduce the burden. District tax reform office and joint acceptance of relevant departments.

IV. Construction period

The construction period of this project is completed from June 18th, 2_ year to July 18th, 2_ year. After the project is completed, the district will reduce the burden. The district tax reform office and the acceptance of the construction unit shall prevail.

v. Rights and obligations of both parties

1. Party A and Party B have the right to supervise each other's performance of the first clause of this contract.

2. Party A has the right to supervise the quality of Party B's construction in the whole process, and Party B must obey the instructions, accept supervision and inspection.

3. Quality inspectors should be serious and responsible for the project, stick to their posts, adhere to principles, and negotiate to solve problems existing in the construction process at any time.

4. Party A shall provide necessary facilities for the construction according to the needs of the project.

5. Obligations of Party A

① Party A has the obligation to be responsible for coordinating relevant issues on site.

② pay the project price according to the performance of the contract (the project payment will be paid to Party B after the burden reduction office pays it).

6. Obligations of Party B

① Be fully responsible for the quality, construction period and other work of the project, do all the preparatory work before construction, and complete the construction tasks on time with good quality and quantity. After completion, Party B shall provide the completion data and apply for completion acceptance.

② the construction must be carried out in strict accordance with the procedures of engineering specifications, and it is not allowed to cut corners or lower the engineering standards, otherwise Party A has the right to ask Party B to rework or stop work.

(3) Party B is solely responsible for construction safety, so as to achieve safe and civilized construction, and take various safety measures to educate construction personnel to prevent all kinds of safety accidents; In case of accident, all responsibilities shall be borne by Party B..

VI. Alteration and rescission of the contract

1. Alteration of the contract

Due to the need of the project, it is really necessary to increase or decrease the quantity of works. The contract can only be altered after negotiation between Party A and Party B, and the contract cannot be altered unilaterally.

2. Termination of the Contract

① Party B delays the commencement of construction within three days after the notice of commencement is issued;

② Party B fails to carry out the construction according to the contract and quality requirements during the construction process;

③ Party B fails to make rectification within a time limit due to quality problems during the construction;

(4) After the project is completed, the contract will be automatically terminated after the warranty period expires and the project payment is paid. In any of the above circumstances, Party A has the right to request the termination of the Contract.

VII. For matters not covered in this contract, both parties can sign an additional contract through negotiation, and the signed additional contract has the same legal effect as this contract.

VIII. This contract is made in duplicate, with Party A and Party B holding one copy respectively, and shall come into effect as of the date when Party A and Party B affix their seals and signs.

party a (official seal): _ _ _ _ _ _ party b (official seal): _ _ _ _ _ _

legal representative (signature): _ _ _ _ _ _ _ legal representative (signature) : _ _ _ _ _ _ _ _

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ It is determined that the local sand and gravel wool provided by Party A will be used as the road construction material, and Party B will be entrusted to build temporary road sections according to Party A's requirements. In order to clarify the contents of the project and the responsibilities of both parties, the following terms are reached through negotiation:

1. Contents and scope of the project.

1. The starting point is the northwest of Shahe Bridge, and there is no road in the east, and the end is the edge of the silage

cellar project. This journey is divided into three sections:

The first section: 947m _ 8.5m _ .25m (length _ width _ thickness);

the second section: 1551m _ 3.5m _ .15m (length _ width _ thickness);

the third paragraph: 7m _ 7.5m _ .25m (length _ width _ thickness)

2. Party B is responsible for providing machinery, labor and technical personnel.

3. engineering and expenses.

according to the above engineering quantity and negotiation between both parties, Party B shall contract this contract in RMB, say one hundred thousand Yuan only (including tax).

ii. construction technology

strictly abide by national construction specifications and technical standards and meet the requirements of party a ..

iii. responsibilities of both parties

1. responsibilities of party a:

be responsible for the command, supervision and management of project quality, safety production, project progress and ingredients.

2. responsibilities of party b:

(1) respect and obey the owner, be fully responsible for the project quality and ensure that it reaches the excellent level or above.

(2) Strengthen the safety production education of the construction team, carry out the construction in strict accordance with the operation specifications, do not connect the circuit and pipeline indiscriminately, do not install the power socket without permission, do not forcibly and illegally construct, and strictly put an end to other safety accidents such as fire. Otherwise, Party B shall bear all the responsibilities arising therefrom.

(3) Workers must be civilized and safe when entering the construction site, and clear the site after the project is completed.

(4) Sufficient construction personnel and technical force must be ensured, with a stable number and high work efficiency, otherwise problems such as delayed teaching staff and project quality caused by this shall be borne by Party B..

(5) Party B shall guarantee that Party A will not bear all the responsibilities arising from any personal injury or property loss, and that Party A will not bear any liabilities of public prosecution, accusation, claim and possible related expenses caused by Party B and its construction personnel.

v. Engineering quality and acceptance criteria

The engineering quality shall conform to the current national acceptance specifications. Must reach the national or professional quality inspection and evaluation of the excellent level or above. Because Party B is blind and reckless; If the construction progress is not in accordance with the operation specifications, resulting in the project quality not meeting the design requirements and unqualified quality, Party A may require Party B to stop work or rework, and the cost of rework shall be borne by Party B, and all the resulting material waste and economic losses shall be compensated by Party B, and the construction period shall not be postponed.

VI. Payment method

After the project is completely completed and accepted by Party A and the supervisor, the project payment will be paid.

VII. Party A has the right to interpret the above clauses of this agreement

VIII. This agreement is made in duplicate, with each party holding one copy, which has the same legal effect. This agreement shall come into effect as of the date of signature and seal by both parties, and shall be terminated after the above-mentioned construction projects for which Party B is responsible have been completed the project acceptance.

party a (official seal): _ _ _ _ _ _ party b (official seal): _ _ _ _ _ _

legal representative (signature): _ _ _ _ _ _ _ legal representative (signature) : _________

_________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

★ Simple version of road construction contract model essay 3

★ Simple rural road construction contract essay 5

★ Latest road construction contract essay 3

★ Rural road construction contract essay 4

★ Rural road hardening contract essay

★ Rural road construction contract essay

★ Rural road construction contract essay 4.