Current location - Quotes Website - Personality signature - How to install HP laserjet 1000 driver under 64-bit WIN 7?
How to install HP laserjet 1000 driver under 64-bit WIN 7?
Methods/steps

Download hp LaserJet 1020 64-bit driver through HP official website first.

Click the downloaded driver, and the driver will automatically decompress the file and save it in the root directory of drive C (c: HP _ LJ1020 _ full _ solution).

There are two types of driver installation (local printer and network printer). The local printer can ignore this step!

Network printers need to add Windows credentials (user name and password of printer server) first.

1. Make sure you can connect to the printer server on the network and record the computer name or fixed IP address (computer name is used for non-fixed IP address).

2. Right-click Windows Start Menu-click Control Panel-Enter User Account-Voucher Manager-Add Windows Voucher-Write the computer name (or fixed IP address) and account password of the printer server!

Let's start installing the driver:

Open the Windows Start menu-Settings-Devices (printers)-Add printers (wait a moment after clicking, and all the printers I need will appear)-Click "The printer I need is not in the list".

1. Select the bottom option "Add local printer or network printer through manual settings".

2. When selecting the printer port, the local printer can directly select the existing port (follow the root print line and select "USB virtual printer port"), and the network printer should choose to create a new port, and then click Next to enter the IP of the printer server and the name of hp LaserJet 1000 shared by * * *. For example: (\ \192.168.0.1\ hplaserjet1000)

3. Select "Install from Hard Disk" under the printer list that pops up.

4. The file directory is selected from the folder where we downloaded hp LaserJet 1020 64-bit driver and extracted it to drive C, C: HP _ LJ1020 _ full _ solution.

5. Select hp LaserJet 1020 in the installation list and ignore the normal printer installation steps below. The printer installation is complete.

6. Open the newly installed printer and enter the printer properties.

7. Check whether the port is a USB virtual port or an IP address port that we set.

8. Enter the Advanced tab and select Printer Processor-Printer Processor Selection (HP 1020 Printing Process)-Default Data Type Selection (raw). (This step is very important! )

Now print the test page and see if it is ok.