In order to implement the Ministry of Construction's "Notice on Issuance of Four Design and Construction Qualification Standards" (Jianshi [2006] No. 40) and "Implementation Measures on the Issuance of Four Design and Construction Qualification Standards" ” (Jianbanshi [2006] No. 68), further strengthens the management of four design and construction qualifications (hereinafter referred to as: design and construction integrated qualifications) in our city, including building intelligence, fire protection facilities, building decoration and decoration, and building curtain wall engineering, and standardizes and improve the qualification licensing behavior, the relevant matters are now notified as follows: 1. Qualification application and approval (need to submit 1 "Declaration Form for Administrative Licensing Matters such as Planning, Survey, Design, Surveying and Mapping Qualifications" and 1 copy of the legal person's power of attorney) (1) Qualification Acceptance Enterprises that apply for integrated design and construction qualifications should submit applications to the Beijing Municipal Planning Commission (hereinafter referred to as the Municipal Planning Commission) and the Beijing Municipal Construction Commission (hereinafter referred to as the Municipal Construction Committee). The acceptance window of the Survey, Design and Surveying and Mapping Management Office of the Municipal Planning Commission (hereinafter referred to as: acceptance window) is responsible for accepting applications for integrated design and construction qualifications. (2) Qualification Application Newly established enterprises may apply for design and construction integration qualifications, with a maximum of no more than Level 2. When an enterprise that already has design or construction qualifications applies for integrated design and construction qualifications, the qualification level it applies for can be one level higher than the company's existing design or construction qualifications for the corresponding special project. (3) Approval Authority The Municipal Planning Commission and the Municipal Construction Commission adopt a joint approach to jointly be responsible for the approval of integrated design and construction qualifications. The first-level qualifications shall be submitted to the Ministry of Construction for approval by the Municipal Planning Commission and the Municipal Construction Committee, and the second-level qualifications and below shall be jointly reviewed and approved by the Municipal Planning Commission and the Municipal Construction Committee. When an enterprise applies for the first-level qualification for integrated design and construction, the Municipal Planning Commission and the Municipal Construction Committee will review the enterprise's application materials according to their respective responsibilities, and jointly provide review opinions. Documents submitted to the Ministry of Construction for review and approval are countersigned by the Municipal Planning Commission and the Municipal Construction Committee. The acceptance window is responsible for submitting the submitted documents and enterprise application materials to the Ministry of Construction for review and approval. When an enterprise applies for design and construction integration level two or lower qualifications, the Municipal Planning Commission and the Municipal Construction Commission will review the enterprise's application materials according to their respective responsibilities, put forward review opinions, and make an administrative licensing decision together. The qualification certificate will be stamped by both committees at the same time. seal. The acceptance window is responsible for delivering administrative licensing documents to the applicant enterprise. (4) Publicity Procedures The Municipal Planning Commission and the Municipal Construction Commission will publicize their review opinions in the survey and design management announcement column/) on the Municipal Planning Commission website before making an administrative licensing decision on the design and construction integration qualifications of Level 2 and below. The publicity period is Within 10 working days, during the publicity period, if the applicant company has objections to the review opinions, it can provide written statements. Any relevant units and individuals who have objections to the application qualifications of the applicant company can report it. After the public notice period, the municipal planning committee and municipal construction committee will conduct a review. If there is no objection to the announcement and the permission is granted, it will be announced in the survey and design management announcement column /) on the Municipal Planning Commission website, and a qualification certificate will be issued. (5) Licensing time limit The time limit for this administrative licensing matter is 45 working days, and the time for publicity and review is not included in the licensing time limit. 2. Application materials (1) When an enterprise applies for design and construction integration qualification for the first time, it must submit the following materials: 1. Application form for engineering design and construction qualification; 2. Copy of the enterprise's legal person business license; 3. The enterprise's capital verification certificate or audited Copies of financial statements; 4. Copies of the company's articles of association; 5. Copies of the identity certificate, resume, and appointment documents of the company's legal representative; 6. Resume of the company's technical leader, copies of employment documents, copies of graduation certificates, and qualification certificates A copy or a copy of the registration certificate stamped with the professional seal, a copy of the professional title certificate, and a proof of personal project performance (certified by the unit or owner where the task was completed, please refer to the "Design and Construction" in the Download Center of the Municipal Planning Commission website Basic information and performance table of integrated qualified professional and technical personnel"; 7. Copy of the identity certificate of the company's registered practitioners and a copy of the registration certificate with a professional seal. For first-time registration, a copy of the qualification certificate and first-time registration review form should be provided. Changes For registration, a copy of the registration certificate and registration change review form should be provided.

If the qualification standards require proof of personal performance, a certificate issued by the unit or owner where the task was completed should be provided (please refer to the "Basic Information and Performance Table of Professional and Technical Personnel with Integrated Design and Construction Qualifications" in the Download Center of the Municipal Planning Commission website) ; 8. Copies of identity certificates, graduation certificates, professional title certificates, project manager qualification certificates, and personal performance certificates required in the qualification standards for the company's non-registered professional and technical personnel (provided by the unit where they completed the task or For certificates issued by the owner, please refer to the "Basic Information and Performance Table of Professional and Technical Personnel with Integrated Design and Construction Qualifications" in the Download Center of the Municipal Planning Commission website); 9. Dismissal of enterprise professional and technical personnel (including registered and non-registered personnel) and the original employing unit Certificate or personnel relationship certificate issued by the relevant personnel management department, copies of the labor contract and social insurance certificate signed with the current employing unit; 10. Proof of the company’s workplace and necessary technical equipment: copies of equipment purchase invoices, factory buildings and Copies of the property ownership certificate of the office space and copies of the house rental contract and other relevant certificates; 11. Enterprise quality management system and management system documents in technology, safety, archives and other aspects: If the enterprise has passed the quality system certification, it can provide an effective quality system A copy of the certification certificate. If certification has not been obtained, the company's quality management system documents must be provided; for the company's technology, finance, operations, safety, personnel, and archives management documents, only the page with the file name, document number, and company seal must be provided. (2) When an enterprise applies for qualification upgrade, addition or extension, in addition to the materials listed in (1), it also needs to provide the following materials: 1. Original and duplicate copies of the enterprise’s qualification certificate; 2. The enterprise’s audited financial statements in the past three years Copy of the report; 3. Proof of project performance completed by the enterprise: (1) Copy of the construction or design contract of the construction project; (2) Project completion acceptance certificate or quality acceptance certificate that complies with national regulations. For fire protection projects, "Construction Project Fire Protection" is also required. Certificates such as "Design Review Opinion Letter", "Building Fire Protection Facilities Technical Test Report" and "Construction Engineering Fire Protection Acceptance Opinion Letter"; (3) Project settlement certificate; (4) If the above information cannot reflect the technical indicators, technical indicators reflecting the technical indicators should also be provided. Project photos, drawings, etc. required by the indicators. (3) Foreign-invested enterprises applying for integrated design and construction qualifications shall comply with the "Administrative Regulations on Foreign-Invested Construction Enterprises" (Ministry of Construction Order No. 113) and the "Administrative Regulations on Foreign-Invested Construction Engineering Design Enterprises" (Ministry of Construction Decree No. 114) ) handle. (4) Document requirements 1. Enterprises applying for design and construction integration qualifications must truthfully fill out the "Application Form for Engineering Design and Construction Qualifications". The legal representative of the enterprise must sign on the application form. The applicant enterprise is responsible for the authenticity of the application materials. 2. In addition to submitting the "Engineering Design and Construction Qualification Application Form" in quadruplicate, the enterprise must also submit two sets of attachment materials and one electronic document. Attachments refer to materials other than the qualification application form. All attachments must be in A4 (210×297mm) paper size, catalogs and page numbers should be prepared, and classified into volumes in the order of “comprehensive information, personnel information, performance information”. The "Personnel Information Booklet" should be bound on a per-person basis in the order of the personnel declared in the application form, and the "Performance Information Booklet" should be bound on a project-by-project basis in the order of the projects reported on the application form. 3. The acceptance window is responsible for checking the original documents provided by the enterprise, and the original documents will be kept by the enterprise. After the qualification application is accepted, all information must not be replaced or modified, and information other than the application for withdrawal will not be returned. 4. The information submitted by the enterprise must be in Chinese. If the original text of the information is in other languages, a Chinese translation must be attached and the translation must be accurate. 5. The application materials must be complete, the forms must be filled out in a standardized manner, the seals must be complete, and the handwriting must be clear. The copies must be clear and legible. If the qualification licensing authority has doubts about the company's application materials, the company should provide relevant supporting materials and cooperate with relevant departments to conduct on-site investigations when necessary. 6. The original copies of the attached materials, except the ID cards, must be verified by the application window of the Beijing Survey, Design and Surveying and Mapping Management Office. The verifier should stamp the verifier’s signature on the copies of the attached materials. The original and copy of the qualification certificate must be copied in full, and there must be no missing pages. Copies should be stamped with the company's official seal, and registered practitioners should be stamped with their personal practice seals. If the materials require an official seal or seal, the copies will be invalid