Current location - Quotes Website - Signature design - * * * The computer won't open. What should I do if I lose my password?
* * * The computer won't open. What should I do if I lose my password?
1. LAN access to the workgroup computer * * * to enjoy files, you need to enter a password, and you can't get in without it.

The method is as follows:

1. Enable guest account: My computer → There is a control panel on the left → Click → User account →gueast→ Enable → Restart the computer.

2. In Control Panel → Administrative Tools → Local Security Policy → Local Policy → User Rights Assignment, add the guest account to "Access this computer from the network" and delete the guest account from "Deny access to this computer from the network".

3. My Computer → Tools → Folder Options → View → Remove the check before "Enjoy using simple files * * * (recommended)".

4. Set * * * folder: right-click the folder or printer that you want to enjoy * * *, and then set the * * * folder through the "Enjoy and Secure" option.

5. In the control panel → administrative tools → local security policies → local policies → security options, set "Network access: access and security mode of local accounts" to "Guest only-local users authenticate as guests" (optionally, this setting can eliminate the dialog box requiring password when accessing, or set it to "Classic-local users authenticate as guests" as needed).

6. Right-click My Computer → Properties → Computer Name. Does your LAN workgroup name appear in this tab, such as "Work"? Then click the "Network ID" button to start the "Network Identification Wizard": click "Next" and select "This computer is part of a commercial network, and use it to connect other working computers"; Click "Next" and select "The company uses a domain-free network"; Click "Next" button, then enter the workgroup name of your local area network, such as "Work", click "Next" button again, and finally click "Finish" button to complete the setup. If there is no solution after the above steps, please continue reading:

7. Check whether local connection is disabled, and right-click local connection → Enable.

8. Turn off the network firewall;

9. Check whether the domain is enabled, whether to join the domain, and check the domain settings;

10, check whether the server service is closed;

1 1. Check whether the local connection IP, subnet mask, gateway and DNS settings are wrong;

12, "local connection" → properties → general, and check whether "Microsoft network files and printers * * *", "Microsoft network client" and TCP/IP protocol are installed;

13.BEUI protocol must be installed in some LAN games and software. Moreover, an article on the Internet said that the TCP/IP protocol supported by Microsoft in WinXP and the compatibility protocol of NWLink IPX/SPX/BIOS are not satisfactory, and BEUI is the protocol with the least memory occupation and the fastest speed in a small LAN (a network of about 200 computers).

2. The computer won't open.

After the computer * * * is enjoyed, the file cannot be opened on the computer * * * Solution:

First, if there is an error "Network path not found", ping the IP address first. If the PING fails, you need to confirm whether it is connected to the network or whether the network connection is normal. Then check whether the firewall is enabled or whether the corresponding port is blocked. If the PING IP address is normal, but the computer name of the PING target machine is unreasonable, it is necessary to check whether there is a problem with the network name resolution. First, check whether there is a problem with all client machines or one machine. If there is a problem with the name resolution of all machines, you need to check it on the DNS or WINS server of the network. If only one machine has a problem, you need to check the hosts and lmhosts files first; If it is normal, you can re-register the DNS name.

2. If "xxx computer is inaccessible" appears, you may not have the right to use network resources. Please contact the administrator of this server to determine whether you have access rights. This may be because the security settings of the computer have been changed, making the target computer inaccessible. You can take the following steps to solve the problem:

1. Open My Computer and select Tools-> from the menu; ; "folder options"->; ; "View", clear the selection of "Enjoy the wizard with * * * (recommended)".

2. Right-click "My Computer" and select "Manage" and "Local Users and Groups"->; ; Users, right-click the guest user, select Properties, and clear the account disabled selection.

3. click "start"->; ; "run", enter secpol.msc, and select "local policy"-> on the left; ; "User Power Distribution", double-click "Access this computer from the network" on the right to make sure everyone is there, and double-click "Deny access to this computer from the network" on the left to make sure it is empty.

4. select "local policy" on the left->; ; "Security Options", a. Confirm that "Network Access: Access and Security Mode of Local Accounts" on the right is "Classic"; B. Confirm that "Microsoft Network Client: Enable Communication Digital Signature (always)" on the right is "Disabled"; C. Confirm that "Microsoft Network Client: Enable digital signature for communication (if allowed by the server)" on the right is "Enabled"; D confirm that "Microsoft Web Server: enable communication digital signature (always)" on the right is "disabled"; E. confirm that "Microsoft network server: enable digital signature for communication (if the server allows it)" on the right is "enabled".

5. Restart the computer.

3. My computer can enjoy files, but there is no password. Why can't other computers open?

"MICROSOFT files and printers * * *" is selected in the 1. network card protocol.

2. The workgroup name is the same (Computer (right click)-Properties-Advanced System Settings-Computer name: can be viewed and changed).

3. The network type (open the network enjoyment center-public network and click to change directly) is changed from "public network" to "work network".

4. Open the Internet * * * Enjoy Center-Change the advanced * * * Enjoy: After the list appears, the first three items should be enabled.

5. Folders that want to enjoy * * *: Right click-Properties-* * * Enjoy: Set * * * Enjoy (select Advanced * * * Enjoy-Enable * * * Enjoy).

6. Control Panel-User Accounts-Manage Other Accounts-Guest Guest Accounts-Enable.