(1) Prepare the required software. Due to the limitation of the uploaded file size, the file is compressed into several compressed packages, and all compressed packages of each software are downloaded and placed in the same storage directory. Click Part0 1 and enter the decompression password to decompress. You can see the password reply after decompression)
1, Motorola Phone Tool (MPT), this random CD is available. If you can't find it, you can go to official website, and Motorola will correspond to the next model of your machine.
2. Motorola driver installation seems to be the latest version of Motorola-driver-installation -v2.4. 1.0. This is mainly to enable computers to identify mobile phones. To put it bluntly, it is the driver package of the mobile phone and the necessary software in the process of brushing;
3, RSD Lite 3.3, this is the tool software of the brush machine, hehe, that is to say, the brush machine is operated under this software interface. Now that the 3.4 version has come out, I will send both.
4, brush the machine package. (that is, the operating system of mobile phone, hehe, similar to windows2000, winxp and other operating systems of computers).
The above four are all necessary software. Generally speaking, after having the above software and installing it correctly, you can brush the machine smoothly. If the mobile phone driver cannot be installed correctly after installing the above software, then the following software is needed.
5. Microsoft network framework. This file supports brush software. If it is not installed, windows will not recognize the brush software or brush package. If your computer can recognize the installation program, then you don't need to install this software!
Radio communication. Software for identifying new hardware in the process of brushing. The installation of this software must be supported by the framework (that is, the above software), that is, the last file must be installed before this file can be installed.
7. Motorola _USB, namely Motorola _ EU _ Driver _ Installation _ v2.6.2 (optional). If RadioComm is installed, but you still can't recognize the new hardware, please install it. This is actually the Motorola driver installer I mentioned earlier, but its version is v2.6.2, and the installation method is the same as Motorola-Driver-Installer -V2.4. 1.0.
I will upload the above software in a future post.
(2) Install related software.
1. Install Motorola's mobile phone tools with the accompanying CD (I don't need to tell you how to install them, the mobile phone instructions are detailed enough).
2. Install the Motorola driver installer. After installation, select All Programs → Installer.exe Motorola Driver Installer → Motorola Driver from the start menu. This file is like a power switch, which will be uninstalled and installed later. No matter what it did when it was turned on, after it calmed down (hehe, after it stopped), click the "Update Driver" option on the left, and then click "Start" on the right, and you will see that the driver was reinstalled and finally quit.
3. Install the brush tool RSD Lite 3.3, and install it directly after decompression.
4. Installation of brush assembly. Hehe, in fact, this is not called installation, just download and decompress. Remember your storage directory.
(3), backup mobile phone data
1. Install "moto usb Driver". After the installation is successful, please change the connection mode in the mobile phone to "Modem", and then plug in the data cable to connect the computer. Double-click mPhonetools.exe, and you will be prompted "Invalid Registry Key", and then click OK. Then a window of "Select Profile" will pop up, and click "Options". An extra part, with a box option, is selected so that this prompt window will not appear next time. Then click OK. The prompt window "Install Motorola Phone Tool" may appear again. Select Cable and click Next. Then the progress bar. Then I saw the software interface of E2.
2. Click "Sync", then the window will pop up, and then click "Sync Now". Tick off calendars and tasks. Click "Sync". If the status shows "Done", press "Close".
3. Click "Phone Book" to see the contacts in the phone. Then click "Backup/Restore" in the menu on the left, and then click "Backup". The prompt window pops up, and then "Next". Select "Copy phone data to PC" and press "Next". Check "Calendar/Task" and click Next. Select the save path, and then click Next. Wait a moment, and then click Finish. Now that your phone feed is backed up, you can swipe your phone at will without losing your contacts. This software is more suitable for some users with more than 250 contacts, and others can copy it to SIM for backup. SIM card will not be affected by the brush machine.
4. After the backup, if you want to modify the contacts on your computer, click "Phone Book" again. Select the contact you want to edit, and add what you want to add in the information below. After the addition is completed. Click "Save". Then click Synchronize on the left menu, click Synchronize Now, and then click Synchronize. A prompt box "Conflict Management" will pop up, specify the priority and select "Computer", then press "Close". These settings will be saved in the phone.
5. If you want to restore the backed-up data, you should still select "Synchronization" in the main interface, then select "Backup/Restore", click "Restore" and "Next", and select the second item "Copy PC data to mobile phone". The following is the same as when backing up.
Second, start brushing the machine.
If it is the original direct brush 45P, it is recommended to brush 43BP first. Brush 43BP to avoid brushing all packages without BP!
(a), brush 43BP package
1. Connect the mobile phone to the computer.
Press and hold the voice button, and then press the power button.
A red screen appears.
After about 10 seconds, press the voice button again to enter BP mode.
Plug in the USB cable and connect the mobile phone to the computer. The computer prompts you to install new hardware and selects automatic installation.
Step 2 brush the machine
After installation, open RSD_Lite software after installation, load 43BP package (SHX file obtained after downloading) with RSD software, and then click "Start" in RSD software interface to start brushing!
Open RSD_Lite software.
Load the brush package with RSD software (download the shx file after decompression)
Click "Start" on the RSD software interface to start brushing your teeth!
When the phone is finished, RSD software will prompt "Please turn on the phone manually" (translated as: please restart the phone manually), and then unplug the cable and battery! Reinstall the battery, enter BP mode again, and plug in the USB cable! If "Pass" appears in RSD software, it means success!
Unplug the battery and wires after brushing! Then plug in the USB cable, press the start key and voice key at the same time to start the machine, and the machine is finished!
(2) Brush 45P integration package
1. Connect the mobile phone to the computer.
The all-in-one package can be brushed in AP mode. As mentioned earlier, the AP does not need to press the voice button again. Here we just need to press the power button+voice button to enter AP mode.
Step 2 brush the machine
Open RSD software and load your brush package (extension sbf). After selecting the brush package, we can click to start. Start brushing the machine At this time, the hardware installation wizard came out again. Automatic installation! Then wait patiently. Don't tamper with the computer at this time, lest it crash! The lighter brush failed and the heavier motherboard was scrapped! The USB cable cannot be tampered with! The mobile phone will go black during the process of brushing, don't panic! After waiting quietly for more than 10 minutes, in RSD software, "Done" is displayed under the status heading. The pass is displayed on the right. The specific method is the same as 2 and 2.
After brushing, the phone automatically turns on. The boot screen has changed, and the main interface is English when it is displayed for the first time. At this time, we check whether the AP S/W version and the BP S/W version are consistent in the main menu → Settings → Mobile phone settings → Properties.
If the two versions are consistent. Congratulations. Brush machine succeeded! ! !
Finally, let's reset it. It is good for the speed of mobile phones! Enter Settings → Phone Settings → Reset → Select Master Reset.
The password is 000000. It will be over in a minute!