For smartphones with SymbianOS6. Running memory virtual buffer disk), E (MMC), Z (read-only system ROM of the mobile phone).

Among the four disks, the file structure of the C E Z ??disk is similar. The D drive is a high-speed virtual drive, mainly used to save the clipboard, wap cache, and some temporary swap files. Under normal circumstances, it is automatically called by the system and has little contact with the user, so no detailed introduction is given. Next, I will explain the directory structure and functions of the three C E Z ??drives in detail. As the number of installed software increases, the directory files on drive C and E will become complicated. Let’s put aside some minor files and directories automatically generated by the software and grasp the structure of the system and talk about some main things:

< p>Under the root directory of drive E: IMAGES SOUNDS VIDEOS directory, as the name suggests, saves pictures, ringtones, and video clips. These three directories appear equivalently in the Nokia directories of C and Z. That is to say, copy the corresponding types of files to the corresponding All directories can be recognized by the system (except Z disk read-only). For example: midi files or wav files copied to E:\sounds\digital\ or C:\nokia\sounds\digital\ can be like Z:\Nokia\ Like the music files solidified in Sounds\digital\, they appear in the scene mode ringtone selection item.

C:\Nokia is an insignificant directory. You can delete it without any impact, but this directory will often be automatically generated. The reason is that there is a special directory in the Nokia directory on the C drive: INSTALL. Obviously this is set up for installing software. As we all know, the Symbian system software is packaged into a SIS compressed package and transferred to a certain memory of the phone (C, E) and then unpacked and installed. The system often saves an installation copy in the C:\NOKIA\INSTALL directory for installation. When encountering unforeseen errors (such as sudden power outage) or user interruption, system security can be restored. This means that in many cases, when installing software on an E drive with a large amount of free space, the "storage space is full" message still appears. The reason is that it is a good habit to keep more than 1M of free space on the C drive. In addition, instead of using the system manager and using SeleQ for SIS installation, this copy can also be avoided.

The following is an analysis of the system core C:\system directory with the most complex structure. The System directory consists of more than a dozen directories and several files:

※APPS directory: The subdirectories under this directory save the main body of the software: user interactive executable files.app, resource files.rsc, icons File .aif, interfaceless executable program .exe, and other files required for operation. In addition to saving the main body of the software in the E:\System\Apps\ directory, software installed on the E drive often creates some configuration files in the C:\System\Apps\ directory with the same name. It is worth noting that C:\System\apps\phone\oplogo saves the operator's logo. If this directory saves a 97*25 bmp image, this image will replace "China Mobile" and the like in standby mode. Operator logo (requires restarting the phone);

※BootData directory: system startup parameters and logs;

※Data directory: extremely complicated directory, saving a variety of Data, briefly introduce a few, backgroundimage.mbm wallpaper, btstate.dat Bluetooth pairing information, Calender calendar, clockapp.dat time parameters, Contacts.cdb contacts, as well as many software configuration files and wap information;

< p>※favorites directory: favorites;

※install directory: saves all software installation information. Every time a software is installed, a sis file index with the same name is saved in this directory, with a size of several hundred bytes. It can range from several K to several K. If you delete this sis file, the installation information of this software will not appear in the program management, and it cannot be deleted through the program management. However, you can still delete the software main body and configuration files directly in the apps directory. If necessary, delete the corresponding runtime library in the libs directory and delete the corresponding auxiliary runtime files in the programs directory to completely uninstall the software;

※libs directory: saves the connection library files required when running certain software, generally Installed by software;

※Mail directory: information directory, with a complex and confusing structure. In addition to some SMS, MMS, and EMail settings files, there are also inbox, outbox, draft box, sending reports, attachments, etc. etc. are distributed among Cong Shen’s complex directories.

It is worth mentioning that the S60 has a relatively broad concept of information. SMS, MMS, Email and even files transmitted by infrared Bluetooth are "information". Therefore, the received infrared Bluetooth files are saved in the mail directory and can be triggered by viewing the information. Corresponding "install", "view", "edit" and other actions;

※MIDIets directory: java configuration file;

※midp directory: java program main body is installed here, if All java is installed on the E drive, and this directory will not appear in C:\system\;

※Programs directory: saves auxiliary running files, and some interfaceless program exe and dynamic link library dll;

※Recogs directory: association directory, the mdl file inside identifies the file association. For example, QuickWord.mdl indicates that doc files in the system are opened by quickword by default. In addition, some mdl files will drive programs to run. For example, eLoader.mdl drives miniGPS, ExtendProfile and other software developed by ePsint. Without this mdl file, the above two software It cannot be loaded automatically;

※Schedules directory: As the name suggests, schedules are saved;

※SharedData directory: All are software configuration files.ini, which has little effect on users, but it can By modifying some of the values ????and paths, the software that must be installed on the C drive (mostly 7650 software, which does not have mmc) is installed to mmc;

※Temp directory: temporary file.

The directory structure of E:\system is basically the same as that of C:\system. The difference is that the intsall directory is missing.

Z:\system is larger and more complex than C:\system. It saves all the system's built-in programs, resource files, hardware drivers, font libraries, international settings and initial parameter settings. Enter *#7370# in standby mode to initialize the phone. The basic process is to clear the C drive and copy some contents of the Z drive to C. To some extent, Z is the initial backup of the system. (The first standby image of the new phone is saved in Z:\system\data\apac.mbm)

About the path issue. Since the system directory structure of the three disks is similar, the path with the same name plays the same role. For example, the associated files in the E:\system\recogs directory can also play the role of association, and the libs and other directories are similar (in some cases To move the contents of C to the corresponding path of E, you need to modify the corresponding ini file in C:\system\SharedData\), and create the Fonts directory under E(C):\system\ to add new system fonts . Only the install directory is only valid under C:\system\.

Understanding the file structure of the S60 system is of great help to us when using mobile phones. We can maximize the running space, understand the causes of errors, and consciously avoid operations that may cause harm. This article only provides a preliminary discussion and application-level explanation of the file structure. Further research can be comprehensively answered in the official documents of Siemens and Nokia Forum. Hope that helps.

For 6600 software, the first thing to install must be file management software. There are seleq, fileman, and SmartFileMan. These three software. Most people use seleq, but I recommend using fileman. Because First, fileman takes up less memory space than seleq. Second, it supports the use of shortcut keys (copy, cut, and paste with one click). Third, it lists the inboxes separately, so you don’t have to work hard to find them yourself. But that’s it. Fileman does not need to change attributes like seleq to delete files (hidden and read-only files are deleted in the same way). This can be said to be a good thing and a bad thing. If you don't know the file very well, it is easy to delete system files by mistake. But I think SmartFileMan is useless. Not recommended. In fact, it is very easy to install these three files using a card reader. Just copy the decompressed files to the others folder on the mmc card, and then install the file management program on your mobile phone. Seeing that it is not as complicated as others said to just click on the installation (this is the easiest way).

Then you can install memory management software. There are appman, stacker, TaskMan, and SpaceDoubler. The functions of TaskMan are: 1. It is convenient to set shortcut keys and can define the four directions of the joystick as four practical functions. 2. Terminate programs running in the background. 3. Compress memory (general effect). 4. Set automatic keyboard lock.

The function of appman is to manage the running programs, release the running memory, and set the application to be connected. The function of stacker is to release the running memory, compress the installed application, and set the application to be connected. SpaceDoubler and The role of stacker is similar. I recommend installing stacker here. Because firstly, it is more stable than other software, and secondly, it can compress installed applications (especially useful for mmc card space is tight).

Next is reading e-books. The most classic one is smartviewer1.1

Advantages: short and concise, only 28k, turning pages forward and backward very quickly, and supporting button page turning (3 and 9)

Disadvantages: Every time you read a new book, you need to reselect the encoding as gbk gb12345 hz gb2312 big5. The book can only be stored in the directory and cannot be retrieved directly from the inbox.

The second is qreader1.39, but it only has small fonts. Garbled characters appear in large fonts, and garbled characters easily appear when turning pages. Turning back is its fatal flaw. You can only use the control stick to turn back on the qreader, not the keys (there is a dedicated key for turning back, and the speed is also good). Then there is readM2.03.

To watch movies, you must install SmartMovie, which supports full-screen playback in .avi format. MobiclipPlayer is also good, but it supports .mo format (there are still relatively few video formats online). The key is to watch Flash animations. Funinhand also needs to be installed. To watch TV online, you have to install it. Although it now says that it supports Internet radio, when I tried it, it only had the Voice of West Lake, and it couldn’t be opened. Haha~~~ (Haha, now our 50 monthly subscription Unlimited traffic), but I think this software requires a monthly subscription, and secondly, it needs to be in a place with good gprs network signal, otherwise it will buffer for 30 seconds.

The online chat software includes AgileMessenger (supports icq, msn, aol, yahoo, jabber), or qq.sis, qq.jar. The one that installs qq.jar is better because it can display Chinese without installing additional fonts. I think the best Internet software is Opera. It supports a wide range of formats and can open basically all web pages in full screen. I use it to go to the 6600 forum, but it is better to use the Opera that comes with the phone because Opera can be cracked. The unlimited trial Chinese version does not support Chinese web pages very well. If there is no built-in opera, it would be good to install DorisBrowser. In fact, NetFront is very good, fast, and supports all formats, but it does not support Chinese websites. The only advantage of WebViewer for web browsing is that it is short and concise, only 50k, unlike Opera which has more than 800k, but it is more difficult and numb to open the 6600 forum.

There are many photography and image processing software on the 6600. There are PhotoPlus. Multipurpose camera, Photorite. Enhanced camera, Photographer. Enhanced photography, PhotoFusion. Enhanced photography, Photobase. Enhanced photography, CameraFX. Enhanced camera, FlexiCamPro. Magic camera. Picture processing includes Hairstyle. Changing picture hairstyles, FotoPack. Games and editing photos, gipviewer picture editing, Handy. PhotoSafe. Picture safe, ImagePlus. Tuba Chinese full version, PhotoExpress. Picture editing. It is recommended to install PhotoFusion. To enhance photography, you can have 4x digital zoom (no matter how big it is), you can take panoramas, you can take comics, you can take deformation effects, you can adjust the color mode and the picture quality and size, it's really good. Photorite. Enhanced camera can perform post-processing on pictures, which generally allows you to take photos that are clearer. It can do 4 special effects and add photo frames.

Office software on the 6600 includes YellowComputing.Ycalc.v1.0 conversion and calculation (supports conversion of several common units, +-*/ is very convenient), Spruce.Calculator U.P. small calculator, Cjudaleev. ProgrammableCalculator.v2.0 function calculator is powerful, contains the most complete mathematical operators, and can be programmed. It supports variables, loops, conditions, information boxes and other features. Quickword. See WORD file software (but it does not support Chinese) , Excel. Table processing, Handy. Day. Schedule management. CurrencyConverter. Professional currency conversion. SmartBirthDay. Anniversary reminder software. However, the software here depends on personal preference, and I have not installed any of them (I installed it first to test, and then deleted it).

There are a lot of 6600 enhancement software. I think I need to install business card backup, because it is often formatted:), here is ContactsManager. Business card backup software.

SystemTools enhances alarm clock, airplane mode, and system tool software. Automatic answering machine software SmartAnswer.v2.0 responds to voice. Incoming Firewall BlackList_v1[1].0. Use miniGPS to realize automatic switching of scene modes + miniGPS1.22 (can be played through mobile base station positioning). Automatic keyboard lock tool, autolock or jjlkeylock, SmartProfiles.v1.04 enhanced profile mode. Incoming call photo: Incoming call image display FSCaller.v2.06, SIMEDA.PhotoID.v3.0.S60 incoming call photo. Those who listen to mp3 include mp3player, mp3go, and UltraMP3. Don’t install mp3go (it’s stuck and not smooth). Others don’t matter. If you like music, you can also install OggPlay1.0. The file size is smaller and the sound quality is better. WorldClockPro is a powerful alarm clock software. Psiloc List Manager enhanced memo. Spy Call 1.1 call recording software. Change standby wallpaper WallpaperChangerv1.01. anti virus mobile antivirus software (just for fun). Phone number location query software (that’s what the software is called). HandyDay can turn off the keyboard light independently. autoexec automatically loads the engine at boot, allowing some software to run at boot. Sun compass (you can wear this when you go out for fun, it’s very useful). The bartender’s good stuff, Cocktail for Series 60 (but it’s in English and you have to register, it introduces a lot of wine preparation methods). Screen saver software: Screen Saver1.72, powerLock1.0 (I think it is not necessary because it will damage the tft screen). Appliance remote control irRemote. Luminous banners (purely for fun), colorful flashlight software Torch (not necessary), and yftp software for ftp on mobile phones. I think there is no need to install many of these software, but the key is to look at personal needs. Installing a business card backup is enough. If you like, you can also install a voice answering machine. In addition to the built-in dictionaries, there are many dictionaries on the 6600, the more powerful one is PowerWord. Haha, I also forgot about the dialing wizard (very fun and powerful, you can dial directly by voice).

There must be something missing from the above (haha. There are a lot of them, but these are basically them). But I think the first thing is to install the software on the mmc card, and the second thing is to install as little as possible (too much will make the system incompatible and unstable and slow down the running speed). Just install as many as you need.

The software installation for 6600 generally falls into the following categories:

.sis The standard Symbian OS operating system installation file can be directly transferred to the mobile phone for installation.

.app is generally a decrypted file. After it is transferred to the mobile phone, use SeleQ or FileMan to overwrite the source file with this file to complete the decryption.

.jar is generally a Kjava game, which can be directly transferred to the mobile phone and installed directly.

The most common .exe is the registrar. As long as you enter the IMEI number of your mobile phone, a string of numbers will be generated. Enter it into the mobile phone, and the software will be a full version.

[$nbsp][$nbsp][$nbsp][$nbsp]The other is the terminal program on the computer, which needs to be installed on the computer, otherwise it cannot be used. Such as the famous "RemoteS60" and "BemusedServer".

.jad installation path file, no installation required (generally not available now).

.txt is mostly an introduction to the software and how to use it, in E-text.

.html mostly introduces the software and how to use it, as well as the home page link of the software.

.pdf is mostly an introduction to software and how to use it, in E-text.

.nfo is generally an introduction to the decryptor and can be opened with a handwritten version. Sometimes it contains the registration code of the software.

.bk1 software backup data, which will contain software registration information.

.rsc The program resource file of the operating system is now generally a Chinese file. Use SeleQ or FileMan to overwrite the source file with this file to complete the Chineseization.

The installation, localization, cracking, deletion and email setting operations of applications

The installation, localization, cracking and deletion of applications are indispensable when using the 6600, but when dealing with new When communicating with computer friends, I found that many computer friends still don’t know how to localize and crack the program, how to install it using a card reader, and some don’t know how to uninstall the program and other basic knowledge. I looked through previous articles and found that there is indeed no system. In the introductory articles, all kinds of basic knowledge are scattered in various articles, and there is no detailed explanation. I think it is necessary to sort it out in order to prepare for the new S60 system, especially for those who are new to the S60 system. For guidance purposes.

1. Necessary conditions

1. File transfer equipment: one of infrared, bluetooth, and card reader is required, except for downloading directly from the Internet by email or mobile phone.

2. Software support: SELEQ or other resource management software

2. Program installation, localization and cracking

1. Composition of program files

(1). Installation file, a file in SIS format, is equivalent to the SETUP (EXE) file in PC. You can install it by opening it directly on your mobile phone.

(2). Chinese files, files in rsc format.

(3). Crack files, files in APP format.

The above three files, SIS, are necessary, while RSC and APP files are optional depending on the actual situation. Some SIS files themselves are Chinese cracked versions without RSC and APP files.

2. Installation, localization and cracking of the program

(1) Installation: directly click on the SIS file on the mobile phone or PC suite, the mobile phone will automatically install it, ignore the middle If a warning appears, press YES all the way to install it successfully (of course, when the prompt "This program may be incompatible, exit the installation?" appears, you cannot select YES).

During the installation process, the program will ask whether to choose mobile phone storage or MMC card storage. It is recommended that except for some necessary programs such as SELEQ, all other applications should be installed on the MMC card. This can save mobile phone storage. The total space of only 6M is also used for phone books, notepads, etc., and when running the program, mobile phone storage is also needed to store some temporary files. When the mobile phone storage space is not enough, it may not be able to run.

After the installation is completed, a related folder will be automatically generated under the E (ie MMC card)\system\apps of the mobile phone. Related files and information of some programs are in this folder.

(2). Chineseization: After the software installation is completed, if there is an RSC file, it means that the software needs to be Chineseized (of course, if your English is particularly good, you can skip this step). Use SELEQ to find the location of the RSC file. location, select it and press Options--Edit--Copy, then use SELEQ to enter the folder corresponding to the E\SYSTEM\APPS\ program, press Options--Edit--Paste, the program will prompt whether to overwrite the original file. After selecting Yes, the localization of the program will be completed.

(3) Crack: If the software is a trial version and there is an APP file, it needs to be cracked. The cracking method is the same as the Chinese version, and you also need to copy and paste under SELEQ.

It doesn’t matter if you only have a card reader. Just read the above three files to any place on the card, either in the root directory or in other folders. As long as you can use SELEQ Just find it, and then follow the steps above. If it is transmitted by infrared or Bluetooth, the file will be stored in the mobile phone storage or MMC card in the form of text messages (it depends on how you set the text message storage to mobile phone). The upper tape is on the MMC card), use SELEQ to search for C(E):\SYSTEM\MAIL\. There are four folders 00001001_S, 00100000_S, 00100001_S, and 00100003_S. They are usually under the 00001001_S folder, starting from A-9. Just search slowly in the folder

3. Deletion of the program: Just use the program management that comes with the phone (available on the desktop). Open the program management and find the program you want to delete. , just press the option and select Delete. It just takes a longer pause when opening and deleting a program and then restoring it. Be patient and don't think it is a crash. The shortcut icon on the desktop will disappear after deletion. , don’t try to delete the shortcut icon on the desktop directly, you won’t find this function.

How to protect your Chinese-English lexicon when formatting the MMC card

The Chinese-English lexicon is stored in the MMC card. When you want to format the card, you can copy it to your mobile phone first.

Specific methods:

1) Make sure the phone has more than 5MB of memory. This is very simple and can delete unimportant files and information.

2) Enter SeleQ, E:\System\Apps\, copy and paste a Dictionary folder inside to C:\System\Apps

3) After formatting, go to Copy Dictionary from C:\System\Apps and paste it into E:\System\Apps.

4) Delete all 11 files in C:\System\Apps\Dictionary, and then delete Dictionary.

Note: SeleQ must be installed in the mobile phone, otherwise it must be copied first.

N-GEGA game installation method

Installation method: First you need SELEQ, unzip the downloaded zip file and use PC suite to transfer it to Fei6, install it first blzinstapp.sis (N-GEGA game main program depends on this file to install) because this is a standard sis file, so there is no problem with the installation. Next, you need to put Puzzle Bobble Vs fix.blz (Bubble Bobble game main program) Under E:\, note that it is the root directory. You can use seleq to cut it from the subdirectory to the root directory. Run BLZINSTAPP, and it will automatically find the BIZ file in the root directory of E:\ (that is, the MMC card). Here is Puzzle Bobble Vs fix.blz, just select it and install it.

Send email with Fei6 step by step

Operation steps:

1. Settings Access point

Method: Menu - Tools - Settings - Connection settings - Access point - Options - Add access point - Use default connection, set as follows:

Connection name : Defined by the user

Data carrying mode: There are three options, GPRS, data call, high-speed (GSM), select GPRS here.

Access point name: cmnet

Username: None

Prompt for password: No

Password: None

Authentication: Normal (safe) is acceptable. In order to have a wider range of uses, you can choose normal.

Homepage: None

2. Set up mailbox

1. Setting method: Information - Options - Settings - Email - Mailbox - Options - New Mailbox, Settings As follows: (Take Sina mailbox as an example)

Mailbox name: customized by the user

Access point used: the access point set by the user in the first step

My email address: the user's own email address

Mail sending server: provided by the email website (here, Sina is used as an example: smtp.sina.com.cn)

Send message: Send immediately (reference value)

Send a copy to yourself: No (reference value)

Include signature: No (reference value)

Username: username of my email address

Password: email password

Mail receiving server: provided by the email website (here, Sina is used as an example: pop3.sina.com.cn )

Mailbox type: POP3

Security protection: Off

APOP security login: Off

2. Mailbox in use: Information — Options — Settings — Email — Mailbox in use — Select the mailbox used to send emails. There will be multiple options when there are multiple mailboxes.

3. After creating and setting up the mailbox, open the menu - Information - the mailbox name you set will appear under the menu.

3. Sending and receiving mail

< p>1. Receive mail

Menu - Information - Find the mailbox you set - Enter, the system will prompt you whether to connect to the mailbox, select "Yes", it will go through the set access point. Connect to your mailbox

After entering the mailbox, press "Options" - to retrieve emails, you can choose to retrieve new messages or all messages

When you choose to connect to the mailbox, the emails in the mailbox will be retrieved. For unread or all emails, you also need to select the emails you want to extract. For extracted emails, the icon in front will turn gray with the arrow pointing inward. If the email has not been extracted, the icon in front will be colored with the arrow pointing outward.

For some unknown reason, the content in the theme is often garbled, but when opened after extraction, the text content is normal. See the picture below

2. Send an email

Menu - Information - Find the mailbox you set - Enter, open the option - Write message - Email, the interface as shown below will appear ,

After writing the recipient, carbon copy person and subject, you can write the main text, and you can choose to insert attachments (Method: Press Options - Insert - Select the attachment to be inserted in the email writing interface , including images, sound clips, video clips, notes, common phrases), when an attachment is inserted, there will be an attachment icon on the status bar above.

You can also press Options - Attachments - to view attachments,

When the text and attachments are all written, you can press Options - Send, and the system will automatically connect to GPRS according to the access point you selected to send,

p>

If the conditions for sending are not met, such as GPRS connection failure, etc., the email will be saved in the outbox waiting for sending. Press the middle button of the navigation key to display postpone sending, delete, send, and move to draft. options, just choose according to your needs.