Extended data:
Some blue screen code:
1.0x000000a: IRQL _ non _ less than _ or _ equal to.
Error analysis: It is mainly caused by driver failure, defective or incompatible software and hardware. From a technical point of view, this shows that IRQL in kernel mode is too high to access memory addresses that it does not have access to.
2 0x0000000012: trap _ cause _ unknown
Error analysis: If you encounter this error message, unfortunately, the result of KeBudCheck analysis is that the cause of the error is unknown.
3 0x000000001a: memory management
Error analysis: This memory management error is often caused by hardware, such as newly installed hardware and memory itself.
4 0x 0000000 1E:KMODE _ EXCEPTION _ NOT _ HANDLED
Error analysis: The Windows kernel has detected illegal or unknown process instructions. This shutdown code is generally caused by memory failure or similar reasons to the previous 0x0000000A.
5 . 0x 00000050:PAGE _ FAULT _ IN _ non paged+AREA
Error analysis: This error may be caused by memory failure (including indoor memory, secondary cache and video memory), software incompatibility (mainly remote control and antivirus software), NTFS volume damage and hardware failure (such as PCI card itself damage).
6.0x00000027:RDR file system
Error analysis: it is difficult to determine the cause of this error, but a problem with Windows memory management is likely to lead to the appearance of this stop code. Solution: If it is because of memory management, usually increasing memory can solve the problem.
7.0x0000002EATA _ BUS _ ERROR
Error analysis: System memory parity errors are usually caused by device drivers accessing nonexistent memory addresses in the presence of defective memory (including physical memory, secondary cache or graphics card memory). In addition, the hard disk is damaged by virus or other problems, which leads to this shutdown code.
8.0x00000035: There are no more IRP stack locations.
Error analysis: Literally, there should be a stack problem in the driver or some software. In fact, the real cause of this failure should be a driver problem or a memory quality problem.
9 0x 0000003 f:NO _ MORE _ SYSTEM _ PTES
Error analysis: errors related to system memory management, such as: memory management problems caused by a large number of input/output operations: defective drivers use memory resources incorrectly; An application (such as backup software) is allocated a lot of kernel memory.
10 0x 00000044: Multiple _ IRP _ complete _ requests.
Error analysis: generally caused by hardware drivers.
References:
Baidu Encyclopedia -Windows Blue Screen Code