Current location - Quotes Website - Team slogan - Installation and setting method of telecom interactive TV
Installation and setting method of telecom interactive TV
1, Introduction of Tianyi Gateway/Optical Cat iTV Interface

(1) The second port and the third port of Tianyi Gateway 2.0 (four ports) are iTV interfaces;

(2) Tianyi Gateway 1.0 or the network ports 2 of two optical cats are iTV interfaces.

(3) The LAN port of the set-top box is connected with Tianyi Gateway/Optical Cat.

2. Connect the set-top box to the iTV interface of the optical cat through the network cable.

Tianyi Gateway 2.0 can connect two set-top boxes, while Tianyi Gateway 1.0 and Guang Mao can only connect 1 set-top boxes. When you have more set-top boxes, you need to expand the number of iTV ports through switches.

(1) The set-top box is connected to Tianyi Gateway 2.0 through a network cable.

(2) the set-top box is connected with the optical cat through a network cable.

Step 3 connect the TV

Connect the HDMI port of the set-top box with the HDMI port of the TV with an HDMI cable.

Tv HDMI interface

Note: HDMI does not support hot plug, please turn off the power before connecting.

4. Turn on the TV and select the input signal source.

Turn on the TV, use the TV remote control, and select the input signal source: HDMI. After the set-top box screen appears, you can use the set-top box remote control.

5, set-top box boot

After connecting the power supply of the set-top box, turn on the set-top box (please turn on the optical cat before turning it on to ensure that the broadband network is normal, that is, the blue light of the optical cat/Tianyi gateway is always on).

, the set-top box will automatically configure the parameters. Please do not turn off the set-top box or disconnect from the optical cat.

6, the system automatic configuration steps

After the set-top box is turned on, it will be automatically configured (see the figure below for details) without your intervention. If there is any problem during the installation, please call the customer service hotline of China Telecom 10000, and we will arrange free on-site service for the maintenance manager. If materials beyond the free installation standard are used in the on-site installation, you may be charged a certain fee, which is subject to the explanation of the local maintenance manager.