Personal Work Summary of Welder Technician 1 Worked in the factory for more than a month. When he first entered the factory, he was shocked by the earth-shaking changes in the factory. Now he is doing simple operations under the guidance of his master. Looking back all the way, I was deeply touched and benefited a lot. I'm a complete novice at welding. I have never been exposed to mechanical processing and manufacturing. Although I have made full psychological preparation, I still feel powerless in the face of unfamiliar industries and working environment. But with the help and guidance of Master and her colleagues, this feeling soon vanished.
The first lesson after being assigned to the team is "knowledge of safe production". Master asked us not to touch and operate unfamiliar equipment, and always pay attention to the wires on the workshop floor, hanging slings and ropes, and so on. Put an end to all potential safety hazards.
In order to make us familiar with our work as soon as possible, Master arranged for us to read and study books such as metal technology, mechanical foundation, mechanical drawing understanding, instructions of NC direct cutting machine, etc., to have a simple theoretical understanding of actual work and to understand all kinds of basic raw materials in combination with theory. For example, H-beam, channel steel, strip steel, manganese steel and so on.
After entering the actual production, whenever production drawings are produced, Master wants us to look at the drawings together, from vehicle parts drawings to panel drawings of large flat trailers. Especially in the aspect of drawing identification of trailer frame, the drawings issued by the technical department are all semi-finished drawings of the whole trailer frame, and the dimensions such as wing plate and reinforcing auxiliary plate that need to be welded with the trailer frame are added. Therefore, in the actual sheet cutting process, it is necessary to restore the drawings to obtain true, reliable and accurate data. This requires us to calculate the given data accurately. In order to ensure this, Master sometimes has to go back and forth to the technical department and the production site many times to confirm the specifications and dimensions of a net, and asked us to do a lot of calculations with him. The master said: "Only when the data is accurate can we produce products that meet the standards. As the first working procedure of the whole factory, we should try our best to reduce the product error. This is responsible for the work and the product. " Master's rigorous work attitude affects us all the time.
Although we had a preliminary theoretical study and the careful guidance of Master, I still felt hard and difficult when I really entered the actual production operation.
First of all, because the installation position of the CNC direct cutting machine is different from the initial setting of the machine tool, the X axis and Y axis in the manual are opposite to the actual X axis and Y axis, which makes me unable to adjust for a long time.
Secondly, I learned that just programming and operating is not enough. For example, in the case of seven plates, it is essential to improve production efficiency in order to ensure the supply of materials for other plates. When cutting, the master will add an extra knife, so that the steel plate can be heated, expanded, cut and deformed synchronously while keeping the internal stress unchanged, and the original four knives for producing two plates will be changed into three knives, so as to save plate, gas, time and efficiency.
For another example, in the blanking process of accessories, due to the irregular graphics of accessories, it is necessary to consider how to produce more accessories on the same size manganese plate, which involves the problem of "nesting cutting". This seems to me more difficult to master. For example, the cutting of the "back door spiral arm" is not surprising. I only consider how to save the knife unilaterally, but I ignore how to save the plate. But after I came into contact with "suit cutting", I understood the depth of this knowledge.
For another example, in the process of cutting the flange of the fuel tank fender for X, we chose the continuous cutting method, which not only reduced the preheating time of each piece, but also reduced the knife repetition of the straight section, improved the smoothness of the cutting seam, and reduced the machining process of the lathe. It can be directly used for drilling, making the production in one go. Master said, "Don't underestimate the production of these accessories, thinking that this is a simple duplication of work. You know, every cut must be carefully calculated to achieve the best results. " The master's motto is "There is no end to learning". He gave us this sentence. He said: "This can always remind yourself to keep learning and making progress in work and life."
With the deepening of study, I will learn the basic knowledge with a more practical attitude and base myself on my own work in order to achieve greater development.
Summary of two welder technicians' work I participated in the 20-day welder training in Jiangsu Institute of Industry and Trade Technicians from August 8 to August 20 this summer, and I was deeply touched by this training, which is summarized as follows.
The profession of welder was strange to me before this. Although I was born as a fitter and majored in automobile maintenance in college, I still feel like a mountain when I come into contact with welders. Therefore, this training made me learn a lot of knowledge, and I was lucky enough to visit Xugong Group and American Caterpillar Company, which broadened my horizons.
Through this training, I learned the operation of argon arc welding, gas shielded welding and some robot welding, and studied the defects of welders for a period of time. Using argon arc welding and gas shielded welding to practice vertical welding, horizontal welding, overhead welding, pipe welding and iron bar welding respectively, although the welding technology and technology are still immature, it can help me better explain several welding methods in future teaching work. In addition, during the training, I had the honor to visit Xugong Group and Xuzhou Carter Company, a wholly-owned subsidiary of the United States. During the visit, I came into contact with the advanced robot automatic welding in the world and the first-class welding engineers in China. These experiences have greatly improved my horizons, accumulated experience for my future teaching work, and improved my future work interest.
Through this training, I have a deeper understanding of my own shortcomings, especially in integrated teaching. As far as my own knowledge is concerned, I prefer theory to practice, which will change completely in the future. I will improve my comprehensive teaching ability and my innovative ability. I will ask more experienced teachers for teaching knowledge, listen more, see more, think more and do more, and strive to contribute to the integrated teaching of the college. Through this training, I also deeply feel that professional development has an absolute relationship with the teaching staff. An excellent teacher team, an excellent professional and technical teacher team and a high-quality teacher team determine the professional development to a certain extent. Through this training, I also feel my own gap, such as my dedication to college, students and work, and my indomitable spirit when I encounter difficulties. These are all aspects that I need to improve my own quality in the future.
Through this training, I also deeply realized that professional development needs innovation, innovation in teaching methods, innovation in teaching concepts, innovation in teaching management and innovation in teaching assessment. For example, in view of the students who are easy to move but not quiet in secondary vocational schools, we should impart theoretical knowledge from practice, engage in some professional competitions and other activities to make use of students' competitive consciousness to achieve the purpose of efficient teaching. In the future teaching process, we should pay attention to the practicality of teaching. Most students in secondary vocational schools want to learn a viable technology, but our teaching is often divorced from actual production. The knowledge learned in school is not used much in enterprises, and it has to be retrained in enterprises. In the future, we will try our best to adopt the teaching mode of allowing students to work directly in enterprises, so as to make our students more popular with employers.
After this training, I also have a deeper understanding of my future work goals. In the future, I will combine my own specialty and specialty, get rid of my own shortcomings, learn from it in technology, adapt to the actual situation of the college in teaching methods, make a breakthrough in innovative teaching and management, be unique in the welder major of the college, and make my due contribution to the development of the welder major of the college.
Work summary of three welding technicians has been engaged in welding operation technology since he entered the factory in xxxx. 1996, trained and assessed by the municipal labor bureau, and obtained the certificate of welder for boiler and pressure vessel. Because of hard work at ordinary times, 1996 10 was selected by the company and sent to the chemical machinery factory of Nanhua Group Company to study manual argon tungsten arc welding for four months, and in the same year, it obtained the certificate of argon arc welding welder. In order to improve the company's welding technology, 1997, the company recommended me to Hangzhou Boiler Factory to study welding technology and CO2 operation technology for one year. So far, I can carry out five welding operations, namely covered electrode arc welding, argon arc welding, gas welding, CO2 gas shielded welding and submerged arc welding. I have eight qualified projects in covered electrode arc welding and submerged arc welding.
In order to apply what I have learned, I have participated in the welding work in the trial production of our new products (15T and 20T steam boilers) since 1998. During the trial production, I put forward my own scheme, which was recognized by the company. After the hydrostatic test, the welding qualification rate reached 100%. In the same year 10, entrusted by the company's welding laboratory, we carried out the argon arc welding forming test of the flue pipe. After our own theoretical discussion and overtime operation training, we compiled a complete flue pipe welding process, which made our own contribution to the company's manufacturing products and reducing production costs and was commended by the original factory. 1999-2000, our company 10T and 6T finned tubes used CO2 gas shielded arc welding instead of manual arc welding, which improved the working efficiency by 2-3 times and advanced the technology. The welding method and technology have been recognized by our company. At present, in the trial production process of 2T and 4T oil-fired boilers produced by our company, the complexity of product mechanism has brought great inconvenience to welding. I actively cooperated with the technical, technological and production departments, and personally participated in covered electrode arc welding and argon arc welding during the production and circulation of the drum. The pass rate of X-ray flaw detection of the weld was 65,438+000%. The first-hand information of process parameters in the production process is also mastered, which provides a basis for writing process flow cards. In recent years, he also assisted the process department in welding process evaluation and participated in the compilation of welding process, during which he compiled the pipeline welding process in the installation of industrial boilers in the company. At the same time, according to the characteristics of our company's current product organization and my accumulated practical experience, the book "Welding Safe Operation Technology" was compiled, which was approved by the company's research institute as the welder training textbook of our company's welding laboratory, and played a certain guiding role in the safe operation technology of new welders.
In the welding of the center beam, I suggest changing the V-shaped groove in the design into a U-shaped groove, because the skeleton of the center beam is the center of load and the gathering point of bending moment and torque. Although V-groove is easy to process and weld, it is easy to produce angular deformation after welding, but U-groove does not, and under the same welding thickness, the amount of metal filled in U-groove is much less than that in V-groove. At that time,
During the welding and installation of sliding die, I learned and summarized the new knowledge of welding and cutting. Because the formwork weighs 80 tons, it slides as high as 6 meters every day in inclined shaft concrete construction. When sliding, it is necessary to overcome not only its own gravity but also the strong friction force of concrete on the formwork, so the requirements for materials are very high, and new steel grades are applied in the design. Because the performance of the new steel has been greatly improved, high-quality welding materials are needed to match it, so as to strengthen and toughen the weld. I constantly improve the weldability of new steel grades, reduce the tendency of welding cracks and simplify the welding process. According to technicians, the welding technology of this kind of steel should be mainly developed in the direction of high efficiency and automation, and the strength and service life will be doubled without increasing alloying elements. This is not only a major change in steel materials, but also a new opportunity and challenge for the development of welding technology and welding materials. Through this homework and study, I am more obsessed with welding and cutting, because with the continuous updating of metal materials, welding technology will also advance by leaps and bounds.
As the saying goes: "No pains, no gains", after years of hard work and unremitting efforts, I have made a little progress, but the branch has given me a high honor: 1990 was rated as an advanced worker of the bureau; 1994 was awarded the "Shuang Yi" expert of the sub-bureau; 1995 was rated as an advanced individual in safety production in the sub-bureau; 1996 was rated as an advanced production worker in the sub-bureau; 1997 was rated as an advanced production worker in the sub-bureau, and was rated as a personal hero for his outstanding performance in the water-filling meritorious service competition; 1998 was rated as an advanced individual in safety and civilization of the sub-bureau; In 2000, it was rated as an advanced individual in safety; In 2002, it was rated as a safe, civilized and advanced production team and individual in the sub-bureau.
Time flies, and I have been working for more than 20 years in a blink of an eye. At work, I constantly enrich my welding knowledge and related knowledge, and gradually improve my ability. From an apprentice, he gradually became a senior welder who can carry heavy burdens alone, and became the backbone in the construction unit, which was praised by technicians and leaders many times. Reasonable suggestions were put forward many times during the construction, which greatly promoted the efficient operation of production; Actively carry out demonstration operation of junior and intermediate welders, impart skills, improve business and professional knowledge, and help solve technical problems in construction; Be able to report the unfavorable factors and potential safety hazards that may occur in the construction process to the leaders directly in charge in time to ensure that the construction is carried out under the conditions of high quality, high technology, high efficiency, safety and environmental protection. As an excellent senior engineer, I have faced the encouragement of the sub-bureau and the applause of my comrades again and again, and I have always turned these encouragement and applause into the motivation of my work again and again, because I always believe in the principle of "natural selection, survival of the fittest". Because of this, I have been constantly improving myself and perfecting myself, and I have only strengthened my belief and determination to obtain the qualification certificate of technician again and again. I am eager to further enrich my knowledge on the platform of technicians, seek reasonable improvement measures, demand myself with higher standards, meet new tasks and challenges with scientific management attitude, and try my best to show my talents and abilities.
Summary of the work of four welders and technicians In recent years, with the education of the leaders of the Transportation Bureau and the help of comrades, I have worked hard to learn professional knowledge, and I have been conscientious, down-to-earth, hard-working and conscientious in this ordinary job of electric welding. In my usual work, I earnestly and humbly learn from my master and consult experienced comrades, so as to constantly improve my professional skills and enrich myself. Participated in professional training organized by labor and personnel departments for many times, and obtained welder certificate. Because I usually work hard. So far, I can perform five welding operations: covered electrode arc welding, arc welding, argon arc welding, arc welding, submerged arc welding and CO2 gas shielded welding.
I have been engaged in electric welding for 30 years, and I can overfulfil the production task every year. I can achieve civilized production, safe production and no major accidents in my work. Work hard, leave Man Qin, never arrive late and leave early, and can unite comrades to work together. Actively study business, constantly improve their professional level, and make contributions to the development of enterprises. The qualified rate of welding reaches 100%, and it has been rated as advanced production worker and labor model for many times.
In the most ordinary job of electric welder, I strive to realize my life value. I have made my due contribution to the development of China's national industry. I study my business seriously and strive to improve my professional quality. When I first joined the work, the leader arranged for me to engage in electric welding. After I accepted the task, my eyes were swollen in a few days, my hands and face were hot and swollen, and I couldn't eat. I can't sleep well. I tried my best, but my work was still unsatisfactory. I really don't want to do this. It's hard to get out of the countryside, and a job is so troublesome. It's really unlucky. With the help of leaders and comrades, I stood up again, worked hard, took pride in being tired and took pleasure in suffering. In practice, I realized that "if a worker wants to do a good job, he must sharpen his tools first". To complete the task, he must have an excellent set of skills to do his job well. So I used my spare time to buy a lot of professional knowledge books and safety operation rules, studied hard and practiced hard, and summed up and explored a whole set of welding technology and safety protection for welding workers in practice. For example, first, I shake covered electrode from side to side, covered electrode and metal fall off. Especially in hot summer, wearing tight clothes and masks is almost airtight. Because of fear, I held covered electrode high, only to see sparks rushing down. After the first covered electrode was welded, nothing was left on the iron plate except the scattered small iron works. It pains me to see others welding so well. The more difficult I am, the harder I work. Constantly sum up experience and lessons, analyze the causes of problems, accumulate experience in practice, and win confidence for yourself. Later works can be welded horizontally and vertically, lying flat and upturned. It laid a solid foundation for completing the tasks assigned by the leaders. During several large-scale equipment renovation and installation, I led everyone to complete the task well, saving money for the enterprise, and the mechanical equipment has been running well so far.
First, improve safety awareness and ensure safe production.
In decades of welding work, I put safety first, strictly abide by the safety operation rules, constantly improve safety awareness and ensure safe production. There are potential dangers in electric welding, such as smashing, bumping, stabbing and scalding. Sometimes working at high altitude is even more dangerous. If it is not properly protected, not only can the work not be completed, but it will also bring unnecessary losses, even huge losses, to itself and the enterprise. In my usual work, I have carefully summed up and accumulated experience in safety, mainly in the following aspects:
1. Electric shock: Equipment that may cause electric shock during welding (or cutting) includes lighting and various motors. First of all, we should pay attention to whether the equipment, tools and power configuration are safe and qualified. Secondly, keep it dry and maintain it regularly.
Second, arc radiation: arc is a strong light, including visible light, ultraviolet light, infrared light and so on. Its radiation is easy to cause harm to people's eyes and skin. Therefore, you must wear a filter glass helmet and mask when working, and put a baffle at work to avoid hurting others.
3. Smoke pollution: Smoke mainly comes from parent materials and coatings that are heated, evaporated or burned. It is easy to cause respiratory organ damage or other complications. Therefore, ventilation should be ensured during welding to avoid smoke retention.
Fourth, fire and explosion: because welding uses power supply, heat source and so on. Improper protection can easily lead to fire and explosion. Therefore, in welding work, we should pay attention to prevent whether sparks and shallow slag splashed during welding and heating may cause fire or explosion. Equipped with necessary fire fighting equipment.
Because I have taken effective safety measures for decades, no matter aerial work or field welding, no matter day or night, there has been no safety accident, which has won benefits for the enterprise.
Second, love your job and do your job well.
1, love your job and do your job in a down-to-earth manner. To do a good job in welding, we must first have a high sense of responsibility and work seriously and responsibly. Personal interests are subordinate to the overall interests and to the leadership and arrangement, so as to be a good logistics soldier and serve the enterprise well. We should strive for perfection in our work and never get tired of it. Sometimes you have to sacrifice your rest time. As long as your job requires it, you have to act at once. Work is an order and there can be no conditions.
2, in the ordinary job, and strive to realize their own life value. I have been engaged in welding since I joined the work, and I can say that I have dedicated my ideals and youth to the welding cause. I have been confused and shaken. With the help of leaders and comrades, I got to know this profession again. A person's value orientation determines a person's goal, and the stage is as big as the heart. This is where the efforts to realize the value of life lie. My values can be summed up in one sentence: stand well in every post, do everything well, and integrate what I have learned with enterprise construction. Serve the development of the enterprise, take root in one's own work, be loyal to one's own work, be a good worker who loves his job, cherish his job, be conscientious, meticulous and loyal to his duties. Unify personal interests with enterprise interests, think about work everywhere, proceed from enterprise interests in everything, and actively do your own job. Strive for "first-class service" and strive to realize your life value in ordinary and ordinary posts.
Third, work hard and continue to do your job well.
Looking back, although some achievements have been made, there is still a long way to go compared with the developing society. I must further study hard, delve into business, and constantly improve my thinking and professional quality. I will work hard, learn from old age, inject modern scientific and technological knowledge into practical work, break through the qualitative leap of welding technology, and make my work reach a new level.
Personal Work Summary of Welder Technician More than five years ago, I learned about the important position of welders in society through my working experience outside. The salary of employees engaged in this work is higher than that of white-collar workers, thus seeing the broad prospects of welders in the future.
So in 20xx, after the relevant training and examination of Hubei Entrepreneurship Training School, I obtained the welder professional qualification certificate and mastered various welding methods and operating procedures. Understand the selection and storage of covered electrode, the type and use of welding equipment, the form of welding joint, the formation principle of weld, the selection of welding position (flat welding, vertical welding, horizontal welding and overhead welding) and welding process parameters (welding current, arc voltage, welding polarity, welding speed, etc.). ), weld layout and weldment structure, gas welding technology and cutting technology, gas welding and gas cutting of common metal materials, argon arc welding principle, welding speed, etc.
In 20xx, I entered a large machinery company in Wuhan. Because there are a lot of practical operations in Hubei Entrepreneurship Skills School, and I have deepened my operating skills in all aspects of welders, I have achieved excellent results soon after I joined the company and became a technical operator of the company. After years of work, I think that as a welder technician, we should constantly innovate and popularize new welding methods, improve product quality and work efficiency for the company, reduce labor intensity, and reduce the harm of toxic smoke and dust produced by manual welding to welders.
I am a studious person in life. Probably because of this, I was sent by the company to a machinery factory in Shenzhen in 20xx to study the welding technology and CO2 operation technology of welders for one year. So far, I can perform five welding operations: covered electrode arc welding, argon arc welding, gas welding, CO2 gas shielded welding and submerged arc welding. In order to prove my ability, I have participated in the welding work in the trial production of new products of our company for many times since 20xx, and boldly put forward my own plan. After the hydrostatic test, the welding qualification rate reached satisfactory data. Later, through our own efforts, we sorted out a complete welding process, which can be used as a reference for the company to manufacture products, reduce the company's production costs and bring great benefits to the company. Soon, the company promoted me to technical director. During the company's tempering in recent years, I have been diligent and willing to work, and the welding quality is stable and excellent, which makes me feel the meaning of life. In the future, I will continue to forge ahead and innovate constantly, not only to do my own job well, but also to do a good job of passing, helping and leading, give full play to my talents, make more contributions to the enterprise, further improve the welding level of the enterprise, and bring more and better benefits to the company and society.
At present, the employment prospects of welders are very broad, and talents in this field are very scarce. So I suggest that people who are interested in this job can do this job, which I think will definitely bring us good income.
Personal work summary of welder technician 6 I have been engaged in electric welding for more than 30 years. In my usual work, I humbly ask experienced comrades seriously, actively study my business and constantly improve my business level. By studying my own business and professional business knowledge, I am conscientious, hardworking and conscientious in this ordinary job of electric welding. Civilized production and safe production can be achieved in the work, and no major accidents have occurred. I did my best in my work and contributed to the development of the enterprise.
In these years of work, I love my job and do my job well. We should strive for perfection in our work at ordinary times, and have fun in hardships. Engaged in welding, gas welding, gas cutting and other work, mastered the basic principles of welding and cutting and some construction specifications of welders; Through a detailed understanding of the characteristics of butt welding production technology, welding technology, tools and operation methods, deeply understand and master the safety technical measures of this type of work, strictly implement safety regulations and protective measures to ensure safe production; At work, I can actively promote and apply new technologies, new processes, new materials and new equipment in construction according to the requirements of construction drawings, so as to continuously improve my business ability. It has been rated as an advanced production worker of the unit for many times.
In the xx thermal power plant project undertaken by my unit, I am responsible for the welding and manufacturing of molds. This task is a very special operation. Sliding forms are all welded and installed with large metal structures, and the welding workload is very heavy. Due to the different thickness, structure and installation conditions of weldments in welding, there are many types of welding joints, such as butt joint, T-joint, corner joint and lap joint, all of which appear at high frequency, and the working conditions are very poor: first, the light in the mold body depends entirely on illumination, which breaks the conventional lighting conditions; Secondly, the air quality in the mold is very poor. Due to poor air mobility and limited ventilation conditions, it is difficult to neutralize and eliminate toxic gases and harmful dust generated during welding and cutting in time, and arc radiation, high-frequency electromagnetic fields, noise and rays generated during operation are also very harmful to the body. The most important point is that underground operation is in danger of falling, which brings great difficulties to the operation. Through various methods, the welding task was finally successfully completed.
During the welding and installation of sliding die, I learned and summarized the new knowledge of welding and cutting. Because the mould weighs 80 tons, it slides up to about 6 meters every day in the concrete construction of sliding form. When sliding, it not only has to overcome its own gravity but also the strong friction force of concrete on the formwork, so the requirements for materials are very high, and new steel grades are applied in the design. Because the performance of the new steel has been greatly improved, high-quality welding materials are needed to match it, so as to strengthen and toughen the weld. I constantly improve the weldability of new steel grades, reduce the tendency of welding cracks and simplify the welding process. For this kind of steel, the welding technology should mainly develop in the direction of high efficiency and automation, and the strength and service life can be doubled without increasing alloying elements. This is not only a major change in steel materials, but also a new opportunity and challenge for the development of welding technology and welding materials. Through this homework and study, I am more obsessed with welding and cutting, because with the continuous updating of metal materials, welding technology will also advance by leaps and bounds.
The building structure of power plant is complex. For the welding of the center beam, I suggest changing the V-shaped groove in the design into a U-shaped groove, because the center beam is the skeleton of the whole mold, the center of load and the gathering point of bending moment and torque. Although the V-groove is easy to process and weld, it is easy to produce angular deformation after welding, but the U-groove does not, and the metal filled in the U-groove is higher than that in the V-groove at the same welding thickness.
In the construction of 8# mixing system in xx Power Plant, due to the lack of technical personnel and weak technical force, the leader appointed me as the head of the whole set from production to installation and debugging. After receiving the task and getting the drawings from the engineering department, I read a lot of materials overnight to analyze and read the drawings, so as to budget the amount of raw materials and the construction of the site. Early the next morning, I analyzed and studied the possible problems in the construction with the comrades in the engineering department. Due to thorough consideration in advance, careful thinking and effective construction measures, it took only 90 days from production to installation, commissioning and commissioning, and the task was completed 20 days ahead of schedule. Especially in the unit project of welding installation, the one-time acceptance rate reaches 100%, which greatly improves the production efficiency and saves money. After the successful completion of the 8# mixing station, the establishment notice of the 5# mixing station was received. At that time, it was a hot summer, and faced with many unfavorable factors such as the hot climate in the south, high temperature roasting and heavy rainfall, the original sufficient construction period seemed a little tense. According to this series of situations, I boldly made a feasible technical construction plan, adopted the method of getting up early and greedy for the dark, reduced the construction links interrupted at noon, arranged the workload of welding and cutting as early as possible, and arranged the workload of installation as much as possible in the afternoon. Due to the proper time arrangement, there was no heatstroke and no delay in the construction period in the hot summer, and the task was completed in 15 days, which was under the joint acceptance of relevant departments such as design, supervision and Party A.
Time flies, and I have been working for more than 30 years in a blink of an eye. In my work, I have continuously enriched my welding knowledge and related knowledge, and my ability has been gradually improved. From an apprentice, he gradually became a senior professional and technical personnel who can be independent, and obtained a college diploma in building technology through amateur study. And through his own efforts, he became a professional engineer. In the construction unit has become the backbone. Reasonable suggestions were put forward many times during the construction, which greatly promoted the efficient operation of production; At ordinary times, actively demonstrate operations to junior, middle and senior welders, impart skills, improve their business and professional knowledge, and help them solve technical problems in construction; Ensure that the construction is carried out under the conditions of high quality, high technology, high efficiency, safety and environmental protection. As an excellent professional and technical personnel, I am eager to further enrich my knowledge, hope to get a higher professional promotion, be healthy and full of vigor, work until I am old, learn from it, inject modern scientific and technological knowledge into practical work, demand myself with higher standards, meet new tasks and challenges with a scientific management attitude, and try my best to show my talents and abilities. Make your work to a new level. Make greater contributions to the development of the unit.
Foshan wants to compete with "running rabbits"
"Chancheng Tiejun" charged forward.
Go all o