The first step is to solve the IP address conflict between optical cat and router.
The principle is that the IP address used by the optical cat is 192. 168. 1, which is the same as the router, so the router must be modified to192.168.0.1,or other IP addresses.
The second step is to modify the connection mode of the light cat. The routing mode currently used. Need to be modified to bridge mode.
Telnet192.168.1.1(user name root, password Zte52 1) and log in. Then enter the command:
The result of sendcmd 1db PuerInfo is as follows:
Enter the broadband area-find the installation progress query at the bottom of the spindle page-find the modified routing bridge on the right.
Step 3, connect the cat with the ADSL wireless Internet access integrated machine and enter the settings.
Question 2: How to set up ZTE routing cat with TP-LINK router? Haha, I just used the router these days. Now let me tell you whether I understand it or not.
Use my method! Because I want to help others, it is absolutely easy to score by the way!
Will the landlord answer the router? The external network cable passes through the cat and then connects to the routing WAN port.
The three machines that surf the Internet are connected to LAN ports respectively, and then set up with the machine that you used to surf the Internet with a cat.
Remember to use the cat to surf the Internet. Don't choose any machine at random. Some machines bind MAC addresses when accessing the Internet. It is easy to use other machines to make OK continue.
Open IE browser and type 192. 168. 1. You may not see the router setup interface.
(This is because the computer IP and routing are no longer in the same network segment. Right-click Network Neighborhood-Properties-Local Area Connection-Properties, select TCP/IP protocol, and change the IP to 192. 168. 1. * * indicates that the subnet mask between 2 and 254 is 255.255.0, and the default gateway is 6550.
If you open IE browser and enter 192. 168. 1 to enter router settings, then set it directly.
I read more than n posts on the internet, all of which are nonsense. Finally, I haven't figured it out yet. There are actually two places to go.
1. Setup Wizard on the left-select poppe because you are a cat surfing the Internet, and then enter the user name and password of the cat surfing the Internet to confirm OK.
2. Network parameters or wireless parameters, etc. You click in the word "MAC address" and it appears in the middle, with MAC addresses above and below: the MAC addresses with the word "clone MAC address" above and below are different. Click OK to save the clone MAC address.
3. System Tools: There is a router in it, and select OK when starting.
It's that simple. Actually! This should enable you to surf the internet.
The IP configuration can be configured without accompanying the capital.
You didn't share the tragedy
Question 3: How does ZTE Optical Cat connect to the router? How to set 1 and connect the tail fiber of fttp to the optical port of the optical cat; 2. The optical cat leads out the network cable and connects it to the WAN port of the router; 3. The lan port of the router leads out the network cable to connect all the internet devices; 4. Wireless Internet access devices are connected to the optical fiber network through wireless signals routed wirelessly.
The router settings are as follows:
First, the router is initialized and reset to restore the factory settings (very important). Then connect the computer network card to the LAN port of the router with a network cable, and the router is turned on. Computer network card settings192 5438+068.438+0.2;
Double-click IE browser on the computer, enter the IP address of the router default setting page in the address bar: 192. 168. 1, and press enter;
Enter the default user name: admin and default password: admin; Click OK.
1, set dial-up account:
Click the installation wizard in the left column, and then click Next;
Click ADSL Virtual Dialing (PPPOE), and then click Next;
Enter the broadband account number and password, and click Next;
2. Set the wireless wifi password:
There is also an option in the wireless settings on the left. There is an ssid, which is a wireless account of WiFi. After setting, there is also a password setting. The password should be as complex as possible, preferably a combination of alphanumeric symbols.
3. Set the login password
Change the default administrator and administrator login password to prevent someone from modifying the router after cracking the password and destroying the network.
Click Save and Restart to complete the operation.
Question 4: How does ZTE Fiber Cat set up a TP router? Completion steps: 30 minutes. Do I need dial-up internet access to connect directly to the computer? Or surf the internet directly without dialing. If you connect directly to the computer, you can surf the Internet without dialing, which means that the light cat has its own dialing function. Then the router setup needs to set dynamic mode and static mode. Static mode is recommended. First of all, you can automatically obtain an ip subnet mask gateway DNS through the computer, and then select the static mode in the router to fill in the IP and other information you have obtained and save it! If dialing, select the dialing method and fill in the broadband account password!
Because the address of the optical fiber cat and the wireless router is the same, it will cause conflicts, so the address of the router should be modified. In the network parameters, set the LAN port to modify the IP address, and click Save to restart the router.
Entering the Internet access mode setting, we can see that there are three Internet access modes to choose from. If your family is dialing, please use PPPoE. Dynamic IP can be used by computers directly plugged into the network, and there is a DHCP server in the upper layer. Static IP is generally a dedicated line or something, and it may also be a cell bandwidth or something. There is no DHCP server in the upper layer, or you want to fix IP. I chose pppoe because I dialed. (It is recommended that you choose to let the router automatically choose the Internet access method. )
If you choose PPPOE dial-up Internet access, you need to fill in the Internet account and password. Everyone should understand this. When broadband is turned on, you will have an account. Just fill it out and it's OK.
Then the next step is to enter the wireless settings. We can see the channel, mode, security options, SSID and so on. Generally, SSID is a name, you can fill it in at will, and then the pattern is 1 1bgn. We should choose wpa-psk/wpa2-psk as the wireless security option, which is safer and won't let others easily crack or surf the Internet.
The next step is to set it up successfully.
Click Finish and the router will automatically restart. Please wait patiently.
I hope my answer is helpful to you! Ouch! Hand cramp!
Question 5: How does ZTE wireless cat connect with TP-LINK wireless router? Everything can be done except ITV port. The key point is that the default IP address of this cat is 192. 168. 1, which is not easy to change and conflicts with the default addresses of most routes. Therefore, if you want to add a route, you must first change the IP address of the route to except 65438+. In fact, 108L has its own routing function and WIFI function, which is what I use. It's not difficult to crack it yourself.
Question 6: How does ZTE router set up a wireless network?
Question 7: How does ZTE Optical Cat connect a router to set up a wireless router? Installation steps:
1. Change the local connection to get the IP address automatically.
2. The network cable from the broadband "modem" is connected to the "WAN" port on the router, and any port of the router (1, 2, 3, 4) is connected to the network cable port behind the computer host.
3. Open a browser, and enter 192. 168. 1 or192.168.0./router password and username admin.
4. Enter the router setup screen, select PPPOE(ADSL Virtual Dialing) mode, enter your home account number and password, and confirm.
5. Then set the SSID, encryption method and password.
6. Save and restart. The router is set up!
Question 8: How did the telecom cat get in and set up the route? Cats are respected users of ZTE ZXHN F460. Hello:
Thank you for using China Telecom.
China Telecom reminds you that due to the different network parameters in different places, the setting of wireless cats is complicated and risky, and it is often impossible to access the Internet after setting. If you need to open the routing function, I suggest you buy a wireless router to connect the cat to realize the routing function.
Anhui Telecom will serve you wholeheartedly, and I hope my answer can be adopted by you.
If you have any questions, please consult the staff of Anhui Telecom's online business hall. Anhui Telecom recently has a mobile phone to grab new year's goods. You can check it when you have time. Wish you a happy life!
Question 9: How does ZTE connect the computer with a router? Specific connection and setting methods are as follows:
1. Don't connect the network cable on the mobile phone to the router yet.
2. Connect one end of the network cable to any LAN port of the router and the other end to the network card of the computer.
3, through the computer browser login interface, click on the LAN port settings.
4. Change the IP of LAN port to192.168.2.1to avoid conflict with the IP network segment of China Mobile Zhongxing Cat;
5. Click the WAN port settings, and select the WAN port Internet access mode: dynamic IP connection.
6. Click DHCP server settings to open the DHCP server.
7. Click Wireless Settings to set the account number and key in the interface. It is suggested to add the @ character to the password to prevent others from accessing the Internet.
8. Click Save to exit, and the router will automatically restart.
9. The network cable on the mobile ZTE Cat is connected to the WAN port of the router. At this time, the computer can surf the Internet.
Question 10: How does ZTE h608b set up tp-link wireless routing at home? H608b is a customized product of Telecom and ZTE. Now you can watch iptv on the Internet normally. First, you should write down the pcipvi used for backup. Internet port and iptv port number are different. H608b can support up to 8 devices (4 wired devices and 4 wireless devices), and it will not be used after that. Next, determine the ports used by iptv, bridge its ports, generally lan2 and lan3, and log in to h608b to set the ports. Where lan2 is the port of iptv, when the bridge is established, the pcipvi port is the port number of iptv just recorded, and the bridge type is other. Then insert a network cable into one of the remaining two ports of h608b, and connect the other to the wan port of tplink. When setting h608b, it should also be set as a bridge, but the type is internat, which will set the port where the network cable is inserted. Next, set up tplink. After entering tplink, choose to establish pppoe virtual dial-up, and then enter the broadband account and password, you can watch iptv and support wireless Internet access for multiple devices. If you don't know how to add QQ2636957 18, that's how my family is set up.