Current location - Quotes Website - Signature design - Instructions for making contactless IC card
Instructions for making contactless IC card
1, the correct draft is coreldraw, AI, photoshop, pdf file. Words, symbols and patterns must be converted into curves and special effects must be converted into bitmaps;

2. Specification of inner frame: 85.5mm*54mm, specification of outer frame: 88.5mm*57mm, fillet 12 degree;

3. The small convex code is the font 14, and the large convex code is the font 18, which can be expressed in bold. Small convex codes and large convex codes can only contain 19 digits at most. The embossed code can be bronzed with silver or other gold and silver, and can also be made according to special requirements;

4. The margin between the convex code and the card must be greater than 5 mm. The inner frame (top and bottom) of the magnetic stripe card is 4mm, and the width of the magnetic stripe is12 mm; ;

5. contactless IC card: don't press the convex code design position on the opposite chip, otherwise the chip can't swipe the card;

6. Don't design the position according to the convex code on the opposite IC chip, otherwise the barcode data can't be read, and the IC card will leave a space according to the barcode model provided by the customer;

7. Color level: The ideal stage range is 18%-85%. If the highlight part is lower than 18% or the dark part is higher than 85%, the color gradient is poor;

8. The color mode should be CMYK positive and negative pure black text or K 100 solid color block with white characters and white characters with white edges;

9. The thickness of lines shall not be less than 0.076 mm, otherwise the printing will not be presented;

10, the color of shading or base map shall not be less than 8%, so as not to be presented when printing the finished product;

1 1. Before placing an order, the documents for making contactless IC cards should indicate the following items in the manuscript;

Answer: explain how many cards to make, and indicate the starting position and special requirements of the card number. The card number is small convex code, large convex code, flat code or spray code; Do you need bronze, iron and silver? How many signature strips are there on the back? Whether to remove the card number or tail number every "4" or "7";

B: If there are patterns or characters on the front that need bronze or silver, they should also be highlighted;

C: If the contactless IC card has any special manufacturing process, it should be explained in detail in the manuscript of the order;

12, due to the different business card printing carriers, the printed finished product will have certain color difference with the color manuscript displayed or printed by the computer;

13, the color filling shall be subject to the CMYK color book. Computer screen color and printer printing color cannot be used as printing colors.